Effect of light-cure time on the initial shear bond strength of a glass-ionomer adhesive
- PMID: 10672216
- DOI: 10.1016/s0889-5406(00)70227-7
Effect of light-cure time on the initial shear bond strength of a glass-ionomer adhesive
Abstract
With the introduction of photosensitive (light-cured) restorative materials in dentistry, various methods were suggested to enhance the polymerization of these materials including layering and the use of more powerful light-curing devices. The purpose of this study was to determine the effects of increasing the light-cure time on the initial shear bond strength (in the first half hour) of a resin-modified glass-ionomer adhesive. Eighty-six teeth were divided into 4 groups according to either; (1) the adhesive system used, namely resin, reinforced glass ionomer, or composite, and (2) the light-cure time for the glass ionomer adhesive, namely 40, 45, and 50 seconds. The bonding approach followed the manufacturer's instructions unless otherwise specified. The results of the analysis of variance comparing the 4 experimental groups (F = 19.4) indicated the presence of significant differences between the groups (P =. 0001). In general, the shear bond strength was greater for the composite adhesive system (¿x(-) = 5.2 +/- 2.9 MPa), followed by the 2 groups bonded with the resin-reinforced glass-ionomer adhesive and light cured for 50 seconds (¿x(-) = 3.8 +/- 1.1 MPa) and 45 seconds (¿x(-) = 3.4 +/- 2.7 MPa). On the other hand, the shear bond strength was significantly lower for the group bonded with the glass ionomer adhesive and light cured for 40 seconds only (¿x(-) = 0.4 +/- 1.0 MPa). The present findings indicated the following: (1) the resin-reinforced glass-ionomer adhesive has a significantly lower shear bond strength in the first half hour after bonding when compared to a composite resin adhesive; (2) the initial bond strength of the glass-ionomer adhesive was significantly increased by increasing the light-cure time for an additional 5 to 10 seconds; (3) the mean increase in the shear bond strength between 5 and 10 seconds of additional light curing was not significant but the variability was less with the longer cure time.
Similar articles
-
Effects of conventional and high-intensity light-curing on enamel shear bond strength of composite resin and resin-modified glass-ionomer.Am J Orthod Dentofacial Orthop. 2001 Jan;119(1):30-5. doi: 10.1067/mod.2001.111399. Am J Orthod Dentofacial Orthop. 2001. PMID: 11174537
-
Effect of time on the shear bond strength of glass ionomer and composite orthodontic adhesives.Am J Orthod Dentofacial Orthop. 1999 Dec;116(6):616-20. doi: 10.1016/s0889-5406(99)70195-2. Am J Orthod Dentofacial Orthop. 1999. PMID: 10587594
-
Effect of altering the type of enamel conditioner on the shear bond strength of a resin-reinforced glass ionomer adhesive.Am J Orthod Dentofacial Orthop. 2000 Sep;118(3):288-94. doi: 10.1067/mod.2000.104903. Am J Orthod Dentofacial Orthop. 2000. PMID: 10982929
-
Therapeutic properties of glass-ionomer cements: Their application to orthodontic treatment.Aust Dent J. 2022 Mar;67(1):12-20. doi: 10.1111/adj.12888. Epub 2021 Dec 6. Aust Dent J. 2022. PMID: 34762310 Review.
-
Does previous application of silver diammine fluoride influence the bond strength of glass ionomer cement and adhesive systems to dentin? Systematic review and meta-analysis.Int J Paediatr Dent. 2020 Jan;30(1):85-95. doi: 10.1111/ipd.12571. Epub 2019 Sep 18. Int J Paediatr Dent. 2020. PMID: 31419356
Cited by
-
Effect of acid pre-conditioning and/or delayed light irradiation on enamel bond strength of three resin-modified glass ionomers.Dent Res J (Isfahan). 2013 May;10(3):328-36. Dent Res J (Isfahan). 2013. PMID: 24019800 Free PMC article.
-
A comparative evaluation of the retention of metallic brackets bonded with resin-modified glass ionomer cement under different enamel preparations: A pilot study.Contemp Clin Dent. 2013 Apr;4(2):140-6. doi: 10.4103/0976-237X.114842. Contemp Clin Dent. 2013. PMID: 24014999 Free PMC article.
-
Ion release from a novel orthodontic resin bonding agent for the reduction and/or prevention of white spot lesions. An in vitro study.Angle Orthod. 2011 Nov;81(6):1014-20. doi: 10.2319/120710-708.1. Angle Orthod. 2011. PMID: 22007662 Free PMC article.
MeSH terms
Substances
LinkOut - more resources
Full Text Sources