Skip to main page content
U.S. flag

An official website of the United States government

Dot gov

The .gov means it’s official.
Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

Https

The site is secure.
The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

Access keys NCBI Homepage MyNCBI Homepage Main Content Main Navigation
Comparative Study
. 2000 Sep;21(9):736-41.
doi: 10.1177/107110070002100904.

Biomechanical comparison of syndesmosis fixation with 3.5- and 4.5-millimeter stainless steel screws

Affiliations
Comparative Study

Biomechanical comparison of syndesmosis fixation with 3.5- and 4.5-millimeter stainless steel screws

M C Thompson et al. Foot Ankle Int. 2000 Sep.

Abstract

Although most authors recommend either 3.5-mm or 4.5-mm cortical screws for syndesmosis fixation, the optimum screw size has yet to be defined. The present study was designed to biomechanically compare syndesmosis fixation with 3.5-mm and 4.5-mm stainless steel screws. Simulated pronation external rotation ankle injuries were created in twelve paired, fresh-frozen cadaveric leg specimens. One limb from each pair received a 3.5-mm tricortical stainless steel screw for syndesmosis fixation (group I), while the contralateral specimen was stabilized using a 4.5-mm screw (group II). Sub-maximal axial ramp (0 to 1200 N) and external rotation/torsional ramp (0 to 5 N-m) loading was performed on each specimen prior to ligament division, following ligament division and following syndesmosis fixation. Axial fatigue testing was then performed at 1.5 Hz for a total of 100,000 cycles (0 to 900 N), and each specimen was subsequently tested to failure in external rotation. Ligament division resulted in syndesmosis widening (p<0.001) and reduced stiffness (p<0.001) during torsional ramp loading. Subsequent syndesmosis screw placement reduced syndesmosis widening (p<0.05) and increased stiffness (p<0.05). Following screw fixation, however, widening remained greater (p<0.005) and stiffness less (p<0.001) than pre-injury levels. No differences between groups I and II were observed during submaximal testing. In external rotation to failure testing, group I failed at a greater angle (38.9 degrees +/- 4.1 degrees vs. 32.0 degrees +/- 3.8 degrees in group II; p<0.05). Failure torque was slightly higher in group I; however, the difference was not statistically significant (17.8 +/- 2.0 N-m vs. 14.3 +/- 2.6 N-m in group II; p=0.082). Five specimens in group I failed by screw pullout and five specimens in group II failed by fibula fracture (p=0.061). The present results suggest that there is no biomechanical advantage of a 4.5-mm screw over a 3.5-mm in fixation of the syndesmosis.

PubMed Disclaimer

Publication types

MeSH terms

Substances

LinkOut - more resources