Skip to main page content
U.S. flag

An official website of the United States government

Dot gov

The .gov means it’s official.
Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

Https

The site is secure.
The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

Access keys NCBI Homepage MyNCBI Homepage Main Content Main Navigation
. 2003 Aug 15;793(2):343-50.
doi: 10.1016/s1570-0232(03)00354-4.

Enantiomeric separation of TAPP, H-Tyr-(D)Ala-Phe-Phe-NH(2), by capillary electrophoresis using 18-crown-6-tetracarboxylic acid as a chiral selector

Affiliations

Enantiomeric separation of TAPP, H-Tyr-(D)Ala-Phe-Phe-NH(2), by capillary electrophoresis using 18-crown-6-tetracarboxylic acid as a chiral selector

Helena Brunnkvist et al. J Chromatogr B Analyt Technol Biomed Life Sci. .

Abstract

A capillary electrophoresis method for the enantiomeric separation of the tetrapeptide H-Tyr-(D)Ala-Phe-Phe-NH(2) (TAPP), has been developed and validated. The preferred background electrolyte (BGE) consisted of 0.1 M aqueous phosphoric acid adjusted to pH 3.0 with triethanolamine. The chiral selectors 18-crown-6-tetracarboxylic acid (18C6H(4)) and heptakis(2,6-di-O-methyl)-beta-cyclodextrin (2,6-DM-beta-CD) were compared and the crown ether 18C6H(4) was found to be superior. The separation of TAPP and its enantiomer was accomplished within 30 min with a resolution greater than 3.5. The method was then investigated with respect to selectivity, linearity, accuracy, range, precision, detection limit (DL), quantitation limit (QL) and robustness, essentially following International Conference of Harmonisation (ICH) guidelines for the validation of analytical methods. The DL and QL for the TAPP enantiomer were found to be 0.3 and 0.8%, respectively, at the target TAPP concentration of 1 mg/ml. Robustness was tested using a full factorial design for the following four experimental variables varied at two levels: pH of the BGE, chiral selector concentration in the BGE, phosphoric acid concentration in the BGE, and temperature. The method showed good performance with respect to all of the validation parameters, and proved to be robust to changes in the experimental parameters within the tested domain.

PubMed Disclaimer

MeSH terms

Substances

LinkOut - more resources