MECHANICAL PROPERTIES OF THE RED CELL MEMBRANE. II. VISCOELASTIC BREAKDOWN OF THE MEMBRANE
- PMID: 14197789
- PMCID: PMC1367508
- DOI: 10.1016/s0006-3495(64)86784-9
MECHANICAL PROPERTIES OF THE RED CELL MEMBRANE. II. VISCOELASTIC BREAKDOWN OF THE MEMBRANE
Abstract
A technique is described for measuring the stress required to rupture the red cell membrane. It requires a measure of the pressure and time to suck a cell into a micropipette. If a long tongue is pulled into a micropipette, the membrane spontaneously collapses on itself, as does a cylinder of fluid of length equal to its diameter, and a small refractile globule and a swollen red cell are produced. If the cells are hypotonically swollen enough, they cannot afford enough area for a long tongue to move into the pipette and when stressed for a time, hemolyse and disappear into the pipette. Calculation of membrane tension shows that the membrane can withstand a wide variety of tensions, up to a maximum of 20 dynes/cm for short periods of time, but even at much lower stresses the membrane eventually either ruptures, and the cell hemolyses, or relaxes; there does not appear to be a yield stress. This observation and the kinetics of the cell breakdown lead to a viscoelastic model of the cell membrane. The membrane substance has a Young's modulus of approximately 10(6) to 10(8) dynes/cm(2) and a viscosity of 10(7) to 10(10) poises. This confirms and extends the viscoelastic model proposed by Katchalsky et al. (3).
MeSH terms
LinkOut - more resources
Full Text Sources
Other Literature Sources
Miscellaneous