Quantification of implant micromotion, strain shielding, and bone resorption with porous-coated anatomic medullary locking femoral prostheses
- PMID: 1446429
Quantification of implant micromotion, strain shielding, and bone resorption with porous-coated anatomic medullary locking femoral prostheses
Abstract
Fourteen femora containing porous-coated anatomic medullary locking (AML) femoral prostheses were retrieved from 12 patients at autopsy. Clinical roentgenograms in 13 femora showed bone remodeling changes, indicating that the implants were fixed by osseointegration. Under simulated physiologic loading, micromotion between the implant and the bone was measured using electrical displacement transducers connected to the implant and to the adjacent cortex. The micromotion between the implants at the areas of porous coating and the adjacent cortex in the one case of failed bone ingrowth measured 150 microns. Maximum relative motion between the cortex and the implant in the areas of porous coating for the 13 cases showing signs of bone ingrowth was 40 microns, and this was completely elastic relative displacement. With all implants, the micromotion between the cortex and the stem was always greatest over the uncoated portion of the stem. Four of the implants were proximally porous coated. With these, the micromotion was greater over the uncoated areas than with more extensively coated stems and was always greatest at the uncoated tip of the prosthesis. The amount of micromotion was directly related to the extent of porous coating on the implant. Maximum tip motion for the proximally coated implants was 210 micra, whereas for the fully porous-coated implants, it was 40 microns. In nine of the autopsies, the contralateral normal femur was obtained in addition to the femur containing the AML (the in vivo remodeled femur). These were used for comparative studies of strain shielding and femoral remodeling. Cortical strains were measured in the in vivo remodeled femora and were compared with measurements made in the contralateral normal femora before and following implantation of a stem identical to that present on the clinically treated side. The data showed major strain reductions in all the postmortem implanted normal femora. Comparison of the strain data from the postmortem implanted normal femora with those from the in vivo remodeled femora clearly indicated that extensive bone remodeling did not result in restoration of cortical strain levels anywhere near normal. Strain shielding continued to exist in all of the remodeled specimens, even up to 7.5 years after surgery. This strain shielding was associated with bone remodeling changes that resulted in regional reductions in bone mineral content that ranged from 7% to 78%. These observations are unique, important, and valuable in defining the in vivo function and clinical behavior of this type of porous-coated femoral component.
Similar articles
-
Porous-coated total hip replacement.Clin Orthop Relat Res. 1994 Jan;(298):89-96. Clin Orthop Relat Res. 1994. PMID: 8119001
-
Correlation of computed finite element stresses to bone density after remodeling around cementless femoral implants.Clin Orthop Relat Res. 1994 Aug;(305):178-89. Clin Orthop Relat Res. 1994. PMID: 8050227
-
Biomechanical and histologic investigation of cemented total hip arthroplasties. A study of autopsy-retrieved femurs after in vivo cycling.Clin Orthop Relat Res. 1989 Dec;(249):129-40. Clin Orthop Relat Res. 1989. PMID: 2582664
-
Cementless femoral design concerns. Rationale for extensive porous coating.Clin Orthop Relat Res. 1998 Oct;(355):189-99. Clin Orthop Relat Res. 1998. PMID: 9917604 Review.
-
Determinants of stress shielding: design versus materials versus interface.Clin Orthop Relat Res. 1992 Jan;(274):202-12. Clin Orthop Relat Res. 1992. PMID: 1729005 Review.
Cited by
-
Biomechanical behaviours of the bone-implant interface: a review.J R Soc Interface. 2019 Jul 26;16(156):20190259. doi: 10.1098/rsif.2019.0259. Epub 2019 Jul 31. J R Soc Interface. 2019. PMID: 31362615 Free PMC article. Review.
-
Anchoring of a Kinked Uncemented Femoral Stem after Preparation with a Straight or a Kinked Reamer.Orthop Surg. 2019 Aug;11(4):705-711. doi: 10.1111/os.12490. Epub 2019 Jul 22. Orthop Surg. 2019. PMID: 31332970 Free PMC article.
-
A Modified Wagner Stem Design Increases the Primary Stability in Cementless Revision Hip Arthroplasty.Arthroplast Today. 2025 Feb 3;32:101622. doi: 10.1016/j.artd.2025.101622. eCollection 2025 Apr. Arthroplast Today. 2025. PMID: 39991631 Free PMC article.
-
Hip painful prosthesis: surgical view.Clin Cases Miner Bone Metab. 2011 May;8(2):14-8. Clin Cases Miner Bone Metab. 2011. PMID: 22461809 Free PMC article.
-
Small design modifications can improve the primary stability of a fully coated tapered wedge hip stem.PLoS One. 2024 Apr 17;19(4):e0300956. doi: 10.1371/journal.pone.0300956. eCollection 2024. PLoS One. 2024. PMID: 38630711 Free PMC article.
Publication types
MeSH terms
LinkOut - more resources
Full Text Sources
Other Literature Sources