Effect of calcium and phosphorus ion implantation on the corrosion resistance and biocompatibility of titanium

Abstract

This paper is concerned with the corrosion resistance and biocompatibility of titanium after surface modification by the ion implantation of calcium or phosphorus or calcium + phosphorus. Calcium and phosphorus ions were implanted in a dose of 10(17) ions/cm(2). The ion beam energy was 25 keV. The microstructure of the implanted layers was examined by TEM. The chemical composition of the surface layers was determined by XPS and SIMS. The corrosion resistance was examined by electrochemical methods in a simulated body fluid (SBF) at a temperature of 37 degrees C. The biocompatibility was evaluated in vitro. As shown by TEM results, the surface layers formed during calcium, phosphorus and calcium + phosphorus implantation were amorphous. The results of the electrochemical examinations (Stern's method) indicate that the calcium, phosphorus and calcium + phosphorus implantation into the surface of titanium increases its corrosion resistance in stationary conditions after short- and long-term exposures in SBF. Potentiodynamic tests show that the calcium-implanted samples undergo pitting corrosion during anodic polarisation. The breakdown potentials measured are high (2.5 to 3 V). The good biocompatibility of all the investigated materials was confirmed under the specific conditions of the applied examination, although, in the case of calcium implanted titanium it was not as good as that of non-implanted titanium.