Friction of orthodontic elastomeric ligatures with different dimensions

Abstract

The aim of this study was to evaluate in vitro the effect of variations in the size of elastomeric ligatures on the static frictional resistance generated by orthodontic sliding mechanics under dry condition. Frictional forces generated by elastomeric ligatures treated with a lubricating material (silicone) were analyzed as well. An Instron testing machine was used to assess the static frictional forces of a 0.019 x 0.025-inch stainless steel rectangular wire that was ligated to a molar convertible tube and to three stainless steel 0.022-inch pre-adjusted brackets with elastomeric ligatures with different dimensions: small, medium, and large. The static friction produced by two prototypes of silicone-lubricated elastomeric ligatures was also measured. The small and medium elastomeric ligatures produced significantly less friction than the large ligatures. No statistically significant difference was found between small and medium ligatures. The decrease in frictional forces of small and medium modules had to be ascribed mainly to the smaller thickness of both ligatures with respect to large ligatures. The lubricated elastomeric ligatures generated significantly smaller frictional forces than nonlubricated elastomeric ligatures with different dimensions. The variation in the dimensions of the elastomeric ligatures is able to influence the static frictional resistance generated by orthodontic sliding mechanics in the buccal segments. The use of small and medium elastomeric ligatures determines a 13-17% decrease in static friction compared with large ligatures. Silicone-lubricated modules can reduce static friction by 23-34% with respect to the small and medium nonlubricated elastomeric ligatures and by 36-43% compared with nonlubricated large ligatures.