Superporous agarose anion exchangers for plasmid isolation
- PMID: 17070823
- DOI: 10.1016/j.chroma.2006.10.029
Superporous agarose anion exchangers for plasmid isolation
Abstract
Superporous agarose beads have wide, connecting flow pores allowing large molecules such as plasmids to be transported into the interior of the beads by convective flow. The pore walls provide additional surface for plasmid binding thus increasing the binding capacity of the adsorbent. Novel superporous agarose anion exchangers have been prepared, differing with respect to bead diameter, superpore diameter and type of anion-exchange functional group (poly(ethyleneimine) and quaternary amine). The plasmid binding capacities were obtained from breakthrough curves and compared with the binding capacity of homogeneous agarose beads of the same particle size. Significantly, the smaller diameter superporous agarose beads were found to have four to five times higher plasmid binding capacity than the corresponding homogeneous agarose beads. The experimentally determined plasmid binding capacity was compared with the theoretically calculated surface area for each adsorbent and fair agreement was found. Confocal microscopy studies of beads with adsorbed, fluorescently labelled plasmids aided in the interpretation of the results. Superporous poly(ethyleneimine)-substituted beads with a high ion capacity (230 micromol/ml) showed a plasmid binding of 3-4 mg/ml adsorbent. Superporous quaternary amine-substituted beads had a lower ion capacity (81 micromol/ml) and showed a correspondingly lower plasmid binding capacity (1-2 mg/ml adsorbent). In spite of the lower capacity, the beads with quaternary amine ligand were preferred, due to their much better plasmid recovery (70-100% recovery). Interestingly, both capacity and recovery was improved when the plasmid adsorption step was carried out in the presence of a moderate salt concentration. The most suitable superporous bead type (45-75 microm diameter beads; 4 microm superpores; quaternary amine ligand) was chosen for the capture of plasmid DNA from a clarified alkaline lysate. Two strategies were evaluated, one with and one without enzymatic digestion of RNA. The strategy without RNase gave high plasmid recovery, quantitative removal of protein and a 70% reduction in RNA.
Similar articles
-
A novel superporous agarose medium for high-speed protein chromatography.Biotechnol Bioeng. 2005 Dec 5;92(5):643-51. doi: 10.1002/bit.20652. Biotechnol Bioeng. 2005. PMID: 16261631
-
Fabrication of superporous agarose beads for protein adsorption: effect of CaCO3 granules content.J Chromatogr A. 2010 Sep 10;1217(37):5808-16. doi: 10.1016/j.chroma.2010.07.046. Epub 2010 Jul 22. J Chromatogr A. 2010. PMID: 20691973
-
Fabrication of mono-sized magnetic anion exchange beads for plasmid DNA purification.J Chromatogr B Analyt Technol Biomed Life Sci. 2009 Jan 15;877(3):127-33. doi: 10.1016/j.jchromb.2008.11.026. Epub 2008 Nov 21. J Chromatogr B Analyt Technol Biomed Life Sci. 2009. PMID: 19070553
-
Production of plasmid DNA in industrial quantities according to cGMP guidelines.Methods Mol Med. 2006;127:339-50. doi: 10.1385/1-59745-168-1:339. Methods Mol Med. 2006. PMID: 16988464 Review.
-
Monoliths for fast bioseparation and bioconversion and their applications in biotechnology.J Sep Sci. 2004 Jul;27(10-11):767-78. doi: 10.1002/jssc.200401812. J Sep Sci. 2004. PMID: 15354554 Review.
Cited by
-
Manufacturing of non-viral protein nanocages for biotechnological and biomedical applications.Front Bioeng Biotechnol. 2023 Jul 13;11:1200729. doi: 10.3389/fbioe.2023.1200729. eCollection 2023. Front Bioeng Biotechnol. 2023. PMID: 37520292 Free PMC article. Review.
-
Manipulation of pore structure during manufacture of agarose microspheres for bioseparation.Eng Life Sci. 2020 Sep 23;20(11):504-513. doi: 10.1002/elsc.202000023. eCollection 2020 Nov. Eng Life Sci. 2020. PMID: 33204237 Free PMC article.
Publication types
MeSH terms
Substances
LinkOut - more resources
Full Text Sources
Other Literature Sources