Skip to main page content
U.S. flag

An official website of the United States government

Dot gov

The .gov means it’s official.
Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

Https

The site is secure.
The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

Access keys NCBI Homepage MyNCBI Homepage Main Content Main Navigation
Review
. 2006 Nov;69(11):1653-64.
doi: 10.1021/np060375j.

Comparative assessment of technologies for extraction of artemisinin

Affiliations
Review

Comparative assessment of technologies for extraction of artemisinin

Alexei A Lapkin et al. J Nat Prod. 2006 Nov.

Abstract

This paper describes results of a multiobjective comparative assessment of several established and emerging technologies for extraction of a natural antimalarial substance, artemisinin. Extractions by hexane, supercritical carbon dioxide, hydrofluorocarbon HFC-134a, ionic liquids, and ethanol were considered. Hexane extraction is an established technology and appears to be the most cost-effective. However, it is characterized by lower rates and efficiency of extraction than all other considered techniques and is also worse in terms of safety and environmental impact. Similarly, EtOH extraction was found to be worse than hexane in all assessment parameters. The new technologies (scCO2, HFC, and ILs) are based on nonflammable solvents and are characterized by faster extraction cycles and more complete extraction of the useful substances and enable continuous extraction processes with reduced solvent inventory. Ionic liquid and HFC-134a technologies show considerable promise and should be able to compete with hexane extraction in terms of cost-effectiveness following due process optimization. New technologies are also considerably safer (no risk of explosions, low toxicity) and greener (having a lower environmental impact in use, potential for biodegradability after use). The methodology of comparative assessment of established and emerging technologies is discussed.

PubMed Disclaimer

Publication types

MeSH terms

LinkOut - more resources