A solid sulfur cathode for aqueous batteries

Abstract

Because of its high resistivity and subsequent low electroactivity, sulfur is not normally considered a room-temperature battery cathode. An elemental sulfur cathode has been made with a measured capacity of over 900 ampere.hours per kilogram, more than 90 percent of the theoretical storage capacity of solid sulfur at room temperature, accessed by means of a lightweight, highly conductive, aqueous polysulfide interface through the electrocatalyzed reaction S + H(2)O + 2e(-) --> HS(-) + OH(-). This solid sulfur cathode was first used in a battery with an aluminum anode for an overall discharge reaction 2Al + 3S + 3OH(-) + 3H(2)O --> 2Al(OH)(3) + 3HS(-), giving a cell potential of 1.3 volts. The theoretical specific energy of the aluminum-sulfur battery (based on potassium salts) is 910 watt.hours per kilogram with an experimental specific energy of up to 220 watt.hours per kilogram.