Fully automated single-use stirred-tank bioreactors for parallel microbial cultivations

Abstract

Single-use stirred tank bioreactors on a 10-mL scale operated in a magnetic-inductive bioreaction block for 48 bioreactors were equipped with individual stirrer-speed tracing, as well as individual DO- and pH-monitoring and control. A Hall-effect sensor system was integrated into the bioreaction block to measure individually the changes in magnetic field density caused by the rotating permanent magnets. A restart of the magnetic inductive drive was initiated automatically each time a Hall-effect sensor indicates one non-rotating gas-inducing stirrer. Individual DO and pH were monitored online by measuring the fluorescence decay time of two chemical sensors immobilized at the bottom of each single-use bioreactor. Parallel DO measurements were shown to be very reliable and independently from the fermentation media applied in this study for the cultivation of Escherichia coli and Saccharomyces cerevisiae. The standard deviation of parallel pH measurements was pH 0.1 at pH 7.0 at the minimum and increased to a standard deviation of pH 0.2 at pH 6.0 or at pH 8.5 with the complex medium applied for fermentations with S. cerevisiae. Parallel pH-control was thus shown to be meaningful with a tolerance band around the pH set-point of +/- pH 0.2 if the set-point is pH 6.0 or lower.