Mechanical characterization of electrospun polycaprolactone (PCL): a potential scaffold for tissue engineering

Abstract

This paper investigates the mechanical behavior of electrospun polycaprolactone (PCL) under tensile loading. PCL in bulk form degrades slowly and is biocompatible, two properties that make it a viable option for tissue engineering applications in biomedicine. Of particular interest is the use of electrospun PCL tubes as scaffolds for tissue engineered blood vessel implants. Stress relaxation and tensile tests have been conducted with specimens at room temperature (21 degrees C) and 37 degrees C. Additionally, to probe the effects of moisture on mechanical behavior, specimens were tested either dry (in air) or submerged in water. In general, the electrospun PCL was found to exhibit rate dependence, as well as some dependence on the test temperature and on whether the sample was wet or dry. Two different models were investigated to describe the experimentally observed material behavior. The models used were Fung's theory of quasilinear viscoelasticity (QLV) and the eight-chain model developed for rubber elastomers by Arruda and Boyce (1993, "A Three-Dimensional Constitutive Model for the Large Stretch Behavior of Rubber Elastic Materials," J. Mech. Phys. Solids, 41(2), pp. 389-412). The implementation and fitting results, as well as the advantages and disadvantages of each model, are presented. In general, it was found that the QLV theory provided a better fit.