Skip to main page content
U.S. flag

An official website of the United States government

Dot gov

The .gov means it’s official.
Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

Https

The site is secure.
The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

Access keys NCBI Homepage MyNCBI Homepage Main Content Main Navigation
. 2009 Feb;18(2):271-5.
doi: 10.1007/s00586-008-0814-7. Epub 2008 Nov 13.

Anatomical study of axis for odontoid screw thickness, length, and angle

Kagan Tun  1 , Erkan Kaptanoglu, Berker Cemil, Mehmet Yorubulut, S Tuna Karahan, Ibrahim Tekdemir
Affiliations

Anatomical study of axis for odontoid screw thickness, length, and angle

Kagan Tun et al. Eur Spine J. 2009 Feb.

Abstract

Anterior odontoid screw fixation is a safe and effective method for treatment of odontoid fractures. The screw treads should fit into the odontoid medulla, should pass the fracture line, and should pull fractured odontoid tip against body of axis in order to achieve optimum screw placement and treatment. This study has demonstrated optimal anterior odontoid screw thickness, length, and optimal angle for safe and strong anterior odontoid screw placement. Dry bone axis vertebrae were evaluated by direct measurements, X-ray measurements, and computerized tomography (CT) measurements. The screw thickness (inner diameter of the odontoid) was measured as well as screw length (distance between anterior-inferior point body of axis and tip of odontoid), and screw angle (the angle between basis of axis and tip of odontoid). The inner diameter of odontoid bone was measured as 6.5+/-1.9 mm, the screw length was 37.6+/-3.3 mm, and the screw angle was 62.4+/-4.7 on CT. There was no statistical difference between X-ray and CT in the measurements of screw thickness and angle. X-ray and CT measurements are both safe methods to determine the inner odontoid diameter and angle preoperatively. Screw length should be measured on CT only. To provide safe and strong anterior odontoid screw fixation, screw thickness, length, and angle should be known preoperatively, and these can be measured on X-ray and CT.

PubMed Disclaimer

Figures

Fig. 1
Fig. 1
a Lateral X-rays of axis vertebra demonstrates points. See Table 1 for abbreviations; b lateral X-rays of axis vertebra demonstrates ABC angle = screw angle; c lateral X-rays of axis vertebra demonstrates G the inner diameter of the odontoid; H the outer diameter of the odontoid. d Sagittal computerized tomography reconstruction demonstrating the inner diameter of the odontoid and the outer diameter of the odontoid
Fig. 2
Fig. 2
a Lateral cervical X-ray demonstrates if odontoid has bigger screw angle, anterior-inferior third cervical vertebra needs to be rimmed. Dotted arrow screw; white arrow third cervical vertebra’s rimmed area. b Lateral cervical X-ray demonstrates if odontoid has smaller screw angle, anterior-inferior third cervical vertebra does not need to be rimmed. Dotted arrow screw
See this image and copyright information in PMC

References

    1. Alfieri A. Single-screw fixation for acute type II odontoid fracture. J Neurosurg Sci. 2001;45:15–18. - PubMed
    1. Anderson LD, D’Alonzo RT. Fractures of the odontoid process of the axis. J Bone Joint Surg Am. 1974;56:1663–1674. - PubMed
    1. Carlson GD, Heller JG, Abitbol JJ. Odontoid fractures. In: Levine AM, editor. Spine trauma. Philadelphia: WB Saunders Co; 1998. pp. 227–248.
    1. Chang KW, Liu YW, Cheng PG, et al. One Herbert double-threaded compression screw fixation of displaced type II odontoid fractures. J Spinal Disord. 1994;7:62–69. doi: 10.1097/00002517-199407010-00009. - DOI - PubMed
    1. Doherty BJ, Heggeness MH. Quantitative anatomy of the second cervical vertebra. Spine. 1995;20:513–517. doi: 10.1097/00007632-199503010-00002. - DOI - PubMed

MeSH terms

LinkOut - more resources