Acceptable weights and physiological costs of performing combined manual handling tasks in restricted postures
- PMID: 1915255
- DOI: 10.1080/00140139108964836
Acceptable weights and physiological costs of performing combined manual handling tasks in restricted postures
Abstract
Eight healthy, male underground coal miners (mean age = 36.9 yrs +/- 4.5 SD) participated in a study examining psychophysically acceptable weights and physiological costs of performing combined lifting and lowering tasks in restricted head-room conditions. Independent variables included posture (stooping or kneeling on two knees), task symmetry (symmetric or asymmetric), and vertical lift distance (35 cm or 60 cm). All tasks were 10 min in duration and were performed under a 1.22 m ceiling to restrict the subject's posture. Subjects were required to raise and lower a lifting box every 10s, and asked to adjust the box weight to the maximum amount they could handle without undue strain or fatigue. During the final 5 min of each test, data were collected to determine the energy expenditure requirements of the task. Results of this study demonstrated that psychophysical lifting capacity averaged 11.3% lower when kneeling as compared to stooping. Subjects selected 3.5% more weight in asymmetric tasks, and lifted 5.0% less weight to the 60 cm shelf compared to the 35 cm shelf. Heart rate was not significantly affected by posture, but was increased an average of 4 beats/min in asymmetric conditions, and by 3.5 beats/min while lifting/lowering to/from the high shelf. Oxygen uptake was increased by 9% when stooped, by 10% when lifting/lowering asymmetrically, and by 8.2% when performing the task to the high shelf. Results of this study indicate that, wherever possible, materials that must be lifted manually in low-seam coal mines be designed in accordance with the decreased lifting capacity exhibited in the kneeling posture.
Similar articles
-
Lifting in four restricted lifting conditions: psychophysical, physiological and biomechanical effects of lifting in stooped and kneeling postures.Appl Ergon. 1990 Sep;21(3):237-45. Appl Ergon. 1990. PMID: 15676780
-
Acceptable workloads for three common mining materials.Ergonomics. 1992 Sep;35(9):1013-31. doi: 10.1080/00140139208967379. Ergonomics. 1992. PMID: 1387078
-
Dynamic biomechanical modelling of symmetric and asymmetric lifting tasks in restricted postures.Ergonomics. 1994 Aug;37(8):1289-310. doi: 10.1080/00140139408964909. Ergonomics. 1994. PMID: 7925254
-
Physical limitations and musculoskeletal complaints associated with work in unusual or restricted postures: a literature review.J Safety Res. 2005;36(1):51-61. doi: 10.1016/j.jsr.2004.12.001. J Safety Res. 2005. PMID: 15752483 Review.
-
A comparative study of methods for establishing load handling capabilities.Ergonomics. 1989 Sep;32(9):1125-44. doi: 10.1080/00140138908966879. Ergonomics. 1989. PMID: 2680481 Review.
MeSH terms
LinkOut - more resources
Full Text Sources
Medical