Indirect adaptive output feedback control of a biorobotic AUV using pectoral-like mechanical fins
- PMID: 19276512
- DOI: 10.1088/1748-3182/4/2/026001
Indirect adaptive output feedback control of a biorobotic AUV using pectoral-like mechanical fins
Abstract
This paper treats the question of servoregulation of autonomous underwater vehicles (AUVs) in the yaw plane using pectoral-like mechanical fins. The fins attached to the vehicle have oscillatory swaying and yawing motion. The bias angle of the angular motion of the fin is used for the purpose of control. Of course, the design approach considered here is applicable to AUVs for other choices of oscillation patterns of the fins, which produce periodic forces and moments. It is assumed that the vehicle parameters, hydrodynamic coefficients, as well the fin forces and moments are unknown. For the trajectory control of the yaw angle, a sampled-data indirect adaptive control system using output (yaw angle) feedback is derived. The control system has a modular structure, which includes a parameter identifier and a stabilizer. For the control law derivation, an internal model of the exosignals (reference signal (constant or ramp) and constant disturbance) is included. Unlike the direct adaptive control scheme, the derived control law is applicable to minimum as well as nonminimum phase biorobotic AUVs (BAUVs). This is important, because for most of the fin locations on the vehicle, the model is a nonminimum phase. In the closed-loop system, the yaw angle trajectory tracking error converges to zero and the remaining state variables remain bounded. Simulation results are presented which show that the derived modular control system accomplishes precise set point yaw angle control and turning maneuvers in spite of the uncertainties in the system parameters using only yaw angle feedback.
Similar articles
-
Fish and chips: implementation of a neural network model into computer chips to maximize swimming efficiency in autonomous underwater vehicles.Bioinspir Biomim. 2008 Sep;3(3):034002. doi: 10.1088/1748-3182/3/3/034002. Epub 2008 Jul 15. Bioinspir Biomim. 2008. PMID: 18626130
-
A biorobotic pectoral fin for autonomous undersea vehicles.Conf Proc IEEE Eng Med Biol Soc. 2006;2006:2726-9. doi: 10.1109/IEMBS.2006.260834. Conf Proc IEEE Eng Med Biol Soc. 2006. PMID: 17946977
-
Biomechanical model of batoid (skates and rays) pectoral fins predicts the influence of skeletal structure on fin kinematics: implications for bio-inspired design.Bioinspir Biomim. 2015 Jun 16;10(4):046002. doi: 10.1088/1748-3190/10/4/046002. Bioinspir Biomim. 2015. PMID: 26079094
-
The application of conducting polymers to a biorobotic fin propulsor.Bioinspir Biomim. 2007 Jun;2(2):S6-17. doi: 10.1088/1748-3182/2/2/S02. Epub 2007 Jun 5. Bioinspir Biomim. 2007. PMID: 17671330 Review.
-
Fish-inspired robots: design, sensing, actuation, and autonomy--a review of research.Bioinspir Biomim. 2016 Apr 13;11(3):031001. doi: 10.1088/1748-3190/11/3/031001. Bioinspir Biomim. 2016. PMID: 27073001 Review.
Publication types
MeSH terms
LinkOut - more resources
Full Text Sources