Skip to main page content
U.S. flag

An official website of the United States government

Dot gov

The .gov means it’s official.
Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

Https

The site is secure.
The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

Access keys NCBI Homepage MyNCBI Homepage Main Content Main Navigation
. 2009 Mar;10(1):1-8.
doi: 10.1007/s10195-008-0038-y. Epub 2008 Dec 24.

UHMWPE for arthroplasty: past or future?

Elena Maria Brach Del Prever  1 , Alessandro Bistolfi, Pierangiola Bracco, Luigi Costa
Affiliations

UHMWPE for arthroplasty: past or future?

Elena Maria Brach Del Prever et al. J Orthop Traumatol. 2009 Mar.

Abstract

Wear debris related osteolysis is recognised as being the main cause of failure in joint replacements based on UHMWPE inserts. However, many solutions and "new" polyethylenes have been suggested in order to address this issue. This review discusses "historical" issues associated with UHMWPE, such as oxidation, sterilization method and storage, as well as "new" topics, such as crosslinking and stabilization. The final aim is to aid orthopaedic surgeons in their selection of polyethylene inserts and in the information given to the patients. The main problem for the polymer is degradative oxidation, which is caused by the combination of the irradiation used for sterilization and oxygen, and which leads to a decrease in wear resistance and mechanical properties. Irradiation and packaging in the absence of oxygen can only reduce the oxidation, while sterilization with gas (EtO or gas plasma) is the only method that effectively eliminates it. Manufacturing processes are of great relevance to the clinical duration and must be considered by surgeons. Crosslinked polyethylene has been developed for joint inserts due to its superior wear resistance compared to conventional UHMWPE; to prevent the oxidation, crosslinked polyethylene requires post-irradiation thermal treatment, which reduces its mechanical properties and which depends on the producer. Several good clinical results from the use of crosslinked acetabular cups have reported at mid-term, while early results for knee replacements are also encouraging. Recently, the use of the antioxidant vitamin E (alpha-tocopherol) has been introduced for joint prostheses in order to prevent the oxidation of both crosslinked and noncrosslinked UHMWPE.

PubMed Disclaimer

References

    1. {'text': '', 'ref_index': 1, 'ids': [{'type': 'DOI', 'value': '10.1016/S0142-9612(99)00053-8', 'is_inner': False, 'url': 'https://doi.org/10.1016/s0142-9612(99)00053-8'}, {'type': 'PubMed', 'value': '10503968', 'is_inner': True, 'url': 'https://pubmed.ncbi.nlm.nih.gov/10503968/'}]}
    2. Kurtz SM, Muratoglu OK, Evans M et al (1999) Advances in the processing, sterilization, and crosslinking of ultra-high molecular weight polyethylene for total joint arthroplasty. Biomaterials 20(18):1659–1688 - PubMed
    1. {'text': '', 'ref_index': 1, 'ids': [{'type': 'DOI', 'value': '10.1302/0301-620X.80B2.8234', 'is_inner': False, 'url': 'https://doi.org/10.1302/0301-620x.80b2.8234'}, {'type': 'PubMed', 'value': '9546473', 'is_inner': True, 'url': 'https://pubmed.ncbi.nlm.nih.gov/9546473/'}]}
    2. Besong AA, Tipper JL, Ingham E et al (1998) Quantitative comparison of wear debris from UHMWPE that has and has not been sterilised by gamma irradiation. J Bone Joint Surg Br 80-B(2):340–344 - PubMed
    1. {'text': '', 'ref_index': 1, 'ids': [{'type': 'PubMed', 'value': '11130644', 'is_inner': True, 'url': 'https://pubmed.ncbi.nlm.nih.gov/11130644/'}]}
    2. McKellop H, Shen FW, Lu B et al (2000) Effect of sterilization method and other modifications on the wear resistance of acetabular cups made of ultra-high molecular weight polyethylene. A hip-simulator study. J Bone Joint Surg Am 82-A(12):1708–1725 - PubMed
    1. {'text': '', 'ref_index': 1, 'ids': [{'type': 'DOI', 'value': '10.1097/00003086-200112000-00007', 'is_inner': False, 'url': 'https://doi.org/10.1097/00003086-200112000-00007'}, {'type': 'PubMed', 'value': '11764372', 'is_inner': True, 'url': 'https://pubmed.ncbi.nlm.nih.gov/11764372/'}]}
    2. Harris WH (2001) Wear and periprosthetic osteolysis: the problem. Clin Orthop 393:66–70 - PubMed
    1. {'text': '', 'ref_index': 1, 'ids': [{'type': 'DOI', 'value': '10.1016/S0883-5403(05)80186-X', 'is_inner': False, 'url': 'https://doi.org/10.1016/s0883-5403(05)80186-x'}, {'type': 'PubMed', 'value': '7673916', 'is_inner': True, 'url': 'https://pubmed.ncbi.nlm.nih.gov/7673916/'}]}
    2. Takeuchi T, Lathi VK, Khan AM et al (1995) Patellofemoral contact pressures exceed the compressive yield strength of UHMWPE in total knee arthroplasties. J Arthroplasty 10(3):363–368 - PubMed

LinkOut - more resources