Optimum optical local-oscillator power levels for coherent detection with photodiodes

Abstract

The use of an optical local oscillator for coherent detection with a photodiode can significantly reduce the responsivity of the detector because of saturation effects. Consequently, local-oscillator shot-noise-limited operation of the detector may not be possible. This effect is analyzed and formulations are developed for the optimum optical local-oscillator power level and the resultant maximum possible signal-to-noise ratio in terms of parameters derived from the photodiode current versus the optical power response curve. An effective heterodyne responsivity that can be used as a part of the specifications when one is procuring photodiodes for use in coherent detection systems is defined.