Photopolymerization of cell-encapsulating hydrogels: crosslinking efficiency versus cytotoxicity
- PMID: 22285429
- DOI: 10.1016/j.actbio.2011.12.034
Photopolymerization of cell-encapsulating hydrogels: crosslinking efficiency versus cytotoxicity
Abstract
Cell-encapsulating hydrogels used in regenerative medicine are designed to undergo a rapid liquid-to-solid phase transition in the presence of cells and tissues so as to maximize crosslinking and minimize cell toxicity. Light-activated free-radical crosslinking (photopolymerization) is of particular interest in this regard because it can provide rapid reaction rates that result in uniform hydrogel properties with excellent temporal and spatial control features. Among the many initiator systems available for photopolymerization, only a few have been identified as suitable for cell-based hydrogel formation owing to their water solubility, crosslinking properties and non-toxic reaction conditions. In this study, three long-wave ultraviolet (UV) light-activtied photoinitiators (PIs) were comparatively tested in terms of cytotoxicity, crosslinking efficiency and crosslinking kinetics of cell-encapsulating hydrogels. The hydrogels were photopolymerized from poly(ethylene glycol) (PEG) diacrylate or PEG-fibrinogen precursors using Irgacure® PIs I2959, I184 and I651, as well as with a chemical initiator/accelerator (APS/TEMED). The study specifically evaluated the PI type, PI concentration and UV light intensity, and how these affected the mechanical properties of the hydrogel (i.e. maximum storage modulus), the crosslinking reaction times and the reaction's cytotoxicity to encapsulated cells. Only two initiators (I2959 and I184) were identified as being suitable for achieving both high cell viability and efficient crosslinking of the cell-encapsulating hydrogels during the photopolymerization reaction. Optimization of PI concentration or irradiation intensity was particularly important for achieving maximum mechanical properties; a sub-optimal choice of PI concentration or irradiation intensity resulted in a substantial reduction in hydrogel modulus. Cytocompatibility may be compromised by unnecessarily prolonging exposure to cytotoxic free radicals or inadvertently enhancing the instantaneous dose of radicals in solution, both of which are dependent on the PI type/concentration and irradiation intensity. In the absence of a radical initiator, the short exposures to long-wave UV light irradiation (up to 5 min, 20 mW cm(-2), 365 nm) did not prove to be cytotoxic to cells. Therefore, it is important to understand the relationship between PIs, light irradiation conditions and crosslinking when attempting to identify a suitable hydrogel formation process for cell encapsulating hydrogels.
Copyright © 2012 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
Similar articles
-
Photopolymerized thermosensitive hydrogels: synthesis, degradation, and cytocompatibility.Biomacromolecules. 2008 Mar;9(3):919-26. doi: 10.1021/bm7013075. Epub 2008 Feb 21. Biomacromolecules. 2008. PMID: 18288801
-
Synthesis, characterization and cytotoxicity of photo-crosslinked maleic chitosan-polyethylene glycol diacrylate hybrid hydrogels.Acta Biomater. 2010 Oct;6(10):3908-18. doi: 10.1016/j.actbio.2010.04.011. Epub 2010 Apr 21. Acta Biomater. 2010. PMID: 20416406
-
Visible light crosslinkable chitosan hydrogels for tissue engineering.Acta Biomater. 2012 May;8(5):1730-8. doi: 10.1016/j.actbio.2012.01.029. Epub 2012 Jan 30. Acta Biomater. 2012. PMID: 22330279
-
Enzyme-catalyzed crosslinkable hydrogels: emerging strategies for tissue engineering.Biomaterials. 2012 Feb;33(5):1281-90. doi: 10.1016/j.biomaterials.2011.10.067. Epub 2011 Nov 26. Biomaterials. 2012. PMID: 22118821 Review.
-
Horseradish peroxidase-catalysed in situ-forming hydrogels for tissue-engineering applications.J Tissue Eng Regen Med. 2015 Nov;9(11):1225-32. doi: 10.1002/term.1917. Epub 2014 Jun 11. J Tissue Eng Regen Med. 2015. PMID: 24916126 Review.
Cited by
-
3D Printed Absorber for Capturing Chemotherapy Drugs before They Spread through the Body.ACS Cent Sci. 2019 Mar 27;5(3):419-427. doi: 10.1021/acscentsci.8b00700. Epub 2019 Jan 9. ACS Cent Sci. 2019. PMID: 30937369 Free PMC article.
-
Mechanically Biomimetic Gelatin-Gellan Gum Hydrogels for 3D Culture of Beating Human Cardiomyocytes.ACS Appl Mater Interfaces. 2019 Jun 12;11(23):20589-20602. doi: 10.1021/acsami.8b22343. Epub 2019 May 30. ACS Appl Mater Interfaces. 2019. PMID: 31120238 Free PMC article.
-
Toxicity and photosensitizing assessment of gelatin methacryloyl-based hydrogels photoinitiated with lithium phenyl-2,4,6-trimethylbenzoylphosphinate in human primary renal proximal tubule epithelial cells.Biointerphases. 2019 May 3;14(2):021007. doi: 10.1116/1.5095886. Biointerphases. 2019. PMID: 31053032 Free PMC article.
-
In situ forming injectable hydrogels for drug delivery and wound repair.Adv Drug Deliv Rev. 2018 Mar 1;127:167-184. doi: 10.1016/j.addr.2018.03.007. Epub 2018 Mar 19. Adv Drug Deliv Rev. 2018. PMID: 29567395 Free PMC article. Review.
-
Multifunctional GelMA platforms with nanomaterials for advanced tissue therapeutics.Bioact Mater. 2021 Jul 6;8:267-295. doi: 10.1016/j.bioactmat.2021.06.027. eCollection 2022 Feb. Bioact Mater. 2021. PMID: 34541401 Free PMC article. Review.
Publication types
MeSH terms
Substances
LinkOut - more resources
Full Text Sources
Other Literature Sources
Research Materials
Miscellaneous