Control of epoxy creep using graphene

Abstract

The creep behavior of epoxy-graphene platelet (GPL) nanocomposites with different weight fractions of filler is investigated by macroscopic testing and nanoindentation. No difference is observed at low stress and ambient temperature between neat epoxy and nanocomposites. At elevated stress and temperature the nanocomposite with the optimal weight fraction, 0.1 wt% GPLs, creeps significantly less than the unfilled polymer. This indicates that thermally activated processes controlling the creep rate are in part inhibited by the presence of GPLs. The phenomenon is qualitatively similar at the macroscale and in nanoindentation tests. The results are compared with the creep of epoxy-single-walled (SWNT) and multi-walled carbon nanotube (MWNT) composites and it is observed that creep in both these systems is similar to that in pure epoxy, that is, faster than creep in the epoxy-GPL system considered in this work.