Steady flow visualization in a rigid model of the aortic bifurcation: application to atherosclerosis

Abstract

Hemodynamics have long been implicated in atherogenesis. The studiesreported here seek to explain the mechanisms for the formation ofatherosclerotic plaque in an aortic bifurcation. Flow studies were made ina model constructed from plexiglass to represent an aortic bifurcation. Under steady flow conditions at inflow Reynolds numbers of 80-1250,the streamline flow patterns and the boundary layer separation zones wereinvestigated in relation to the location of atherosclerotic plaques clinicallyfound at regions in the human aortic bifurcation. The streamline flowswere visualized by a slow injection of dye over the cross section of the tubeentrance and along the tube walls. The studies revealed a complex flowfield where secondary flows, induced by the centrifugal and viscous forces,cause the fluid to move towards the inner walls of the aortic bifurcation. The effect was more clearly seen with increasing Reynolds number. Boundary layer separation zones were observed to occur at the outercorners of the branching. The nature of the separation zone formed wasfound to be dependent on Reynolds number. The residence time of fluidparticles within such a separation zone was estimated by measuring thewashout time of a bolus of dye injected at strategic locations along the tubewalls. The residence time was found to decrease exponentially withincreasing Reynolds number. These observations provide strong support forthe role of flow separation in the accumulation of LDL and plateletaggregation within the aortic bifurcation.

Keywords: Aortic bifurcation; atherosclerosis; residence time; secondary flow; separation zone; steady flow.