Skip to main page content
U.S. flag

An official website of the United States government

Dot gov

The .gov means it’s official.
Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

Https

The site is secure.
The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

Access keys NCBI Homepage MyNCBI Homepage Main Content Main Navigation
. 2014 Sep;217(6):E13.
doi: 10.1038/sj.bdj.2014.644.

Communication methods and production techniques in fixed prosthesis fabrication: a UK based survey. Part 2: production techniques

J Berry  1 , M Nesbit  2 , S Saberi  2 , H Petridis  3
Affiliations

Communication methods and production techniques in fixed prosthesis fabrication: a UK based survey. Part 2: production techniques

J Berry et al. Br Dent J. 2014 Sep.

Abstract

Aim: The aim of this study was to identify the communication methods and production techniques used by dentists and dental technicians for the fabrication of fixed prostheses within the UK from the dental technicians' perspective. This second paper reports on the production techniques utilised.

Materials and methods: Seven hundred and eighty-two online questionnaires were distributed to the Dental Laboratories Association membership and included a broad range of topics, such as demographics, impression disinfection and suitability, and various production techniques. Settings were managed in order to ensure anonymity of respondents. Statistical analysis was undertaken to test the influence of various demographic variables such as the source of information, the location, and the size of the dental laboratory.

Results: The number of completed responses totalled 248 (32% response rate). Ninety percent of the respondents were based in England and the majority of dental laboratories were categorised as small sized (working with up to 25 dentists). Concerns were raised regarding inadequate disinfection protocols between dentists and dental laboratories and the poor quality of master impressions. Full arch plastic trays were the most popular impression tray used by dentists in the fabrication of crowns (61%) and bridgework (68%). The majority (89%) of jaw registration records were considered inaccurate. Forty-four percent of dental laboratories preferred using semi-adjustable articulators. Axial and occlusal under-preparation of abutment teeth was reported as an issue in about 25% of cases. Base metal alloy was the most (52%) commonly used alloy material. Metal-ceramic crowns were the most popular choice for anterior (69%) and posterior (70%) cases. The various factors considered did not have any statistically significant effect on the answers provided. The only notable exception was the fact that more methods of communicating the size and shape of crowns were utilised for large laboratories.

Conclusion: This study suggests that there are continuing issues in the production techniques utilised between dentists and dental laboratories.

PubMed Disclaimer

Conflict of interest statement

The authors declare no competing financial interests.

Figures

Figure 1
Figure 1. Communication of the size and shape of the crown
Figure 2
Figure 2. Most commonly used metal alloys
See this image and copyright information in PMC

References

    1. Christensen G J. A needed remarriage: dentistry and dental technology. J Am Dent Assoc 1995; 126: 116–117. - PubMed
    1. Davenport J C, Basker R M, Heath J R, Ralph J P, Glantz P O, Hammond P. Communication between the dentist and the dental technician. Br Dent J 2000; 189: 471–474. - PubMed
    1. Malament K A, Pietrobon N, Nesser S. The interdisciplinary relationship between prosthodontics and dental technology. Int J Prosthodont 1996; 9: 341–354. - PubMed
    1. General Dental Council. Principles of dental team working. London: GDC, 2013. Online information available at www.gdc-uk.org/Dentalprofessionals/Standards/Documents/DentalTeamWorking... (accessed July 2014).
    1. Council of the European Communities. The medical devices directive. Council of the European Communities, 2010. Online information available at www.ec.europa.eu/enterprise/policies/european-standards/harmonised-stand... (accessed July 2014).

LinkOut - more resources