Skip to main page content
U.S. flag

An official website of the United States government

Dot gov

The .gov means it’s official.
Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

Https

The site is secure.
The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

Access keys NCBI Homepage MyNCBI Homepage Main Content Main Navigation
. 2016 Mar 1;41(5):946-9.
doi: 10.1364/OL.41.000946.

Highly stable, monolithic, single-mode mid-infrared supercontinuum source based on low-loss fusion spliced silica and fluoride fibers

Highly stable, monolithic, single-mode mid-infrared supercontinuum source based on low-loss fusion spliced silica and fluoride fibers

Ke Yin et al. Opt Lett. .

Abstract

A 0.8 to 4.5 μm highly stable all-fiber spliced mid-infrared supercontinuum (SC) source was presented. The joint between the single-mode (SM) pump silica fiber and the ZBLAN fiber (ZrF4 - BaF2 - LaF3 - AlF3 - NaF, a type of fluoride fiber) was fusion spliced, which greatly improved the SC's stability. The low-loss splicing was guaranteed by the similar mode field areas of the fundamental mode LP(01) of the silica and ZBLAN fibers. At the splicing joint the ZBLAN fiber enveloped the silica fiber, thus increasing the robustness of the splice. A low splicing loss of less than 0.1 dB was calculated, which ensured that the whole SC source was very reliable. The SC had a maximal average power of 550.8 mW with a 1.5 dB spectral bandwidth ranging from 2642 to 4065 nm. In particular, the SC power for λ>3.8 μm was measured to be 116.1 mW with a power ratio of ∼21.1% of the total SC power. Perfect Gaussian beam profiles of the SC source demonstrated its SM operation. Over 12 h of continuous operation of this SC source showed its outstanding power stability with a root mean square variation of 0.59%, which also demonstrated the high quality of the fusion spliced joint.

PubMed Disclaimer

Publication types

LinkOut - more resources