Evaluation of MDA instant working level meters

Abstract

The U.S. Bureau of Mines and the Mine Safety and Health Administration have evaluated, for accuracy and reliability, a commercially available Instant Working Level Meter (IWLM) used by the mining industry to measure short-lived 222Rn-progeny concentrations. Six evaluation parameters were determined experimentally. These included two alpha and two beta detector efficiencies for the short-lived 222Rn progeny and two internal conversion factors. The experimental procedure detailing the evaluation technique is described in the paper. The measuring accuracy of 13 instruments is as follows: average inherent uncertainty (at least 68% confidence interval) is +/- 18%; for counting statistics and rounding at 0.10 WL (2.1 microJ m-3), coefficients of variation range from +/- 15% at low gamma flux backgrounds to +/- 50% at gamma flux backgrounds of 0.39 microC kg-1 h-1 (1.5 mR h-1). All parameters were derived theoretically and measured experimentally. All tests were conducted at a sample flow rate of 2.5 L min-1. A sample air flow rate of 7.5 L min-1 can lower the counting statistics to more acceptable levels at 0.1 WL (2.1 microJ m-3).