Skip to main page content
U.S. flag

An official website of the United States government

Dot gov

The .gov means it’s official.
Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

Https

The site is secure.
The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

Access keys NCBI Homepage MyNCBI Homepage Main Content Main Navigation
. 2016 Jul-Aug;21(4):60-5.
doi: 10.1590/2177-6709.21.4.060-065.oar.

Cleansing orthodontic brackets with air-powder polishing: effects on frictional force and degree of debris

Brisa Dos Santos Leite  1 , Nathalia Carolina Fernandes Fagundes  2 , Mônica Lídia Castro Aragón  3 , Carmen Gilda Barroso Tavares Dias  4 , David Normando  5
Affiliations

Cleansing orthodontic brackets with air-powder polishing: effects on frictional force and degree of debris

Brisa Dos Santos Leite et al. Dental Press J Orthod. 2016 Jul-Aug.

Abstract
in English, Portuguese

Introduction: Debris buildup on the bracket-wire interface can influence friction. Cleansing brackets with air-powder polishing can affect this process.

Objective: The aim of this study was to evaluate the frictional force and amount of debris remaining on orthodontic brackets subjected to prophylaxis with air-powder polishing.

Methods: Frictional force and debris buildup on the surface of 28 premolar brackets were evaluated after orthodontic treatment. In one hemiarch, each bracket was subjected to air-powder polishing (n = 14) for five seconds, while the contralateral hemiarch (n = 14) served as control. Mechanical friction tests were performed and images of the polished bracket surfaces and control surfaces were examined. Wilcoxon test was applied for comparative analysis between hemiarches at p < 0.05.

Results: Brackets that had been cleaned with air-powder polishing showed lower friction (median = 1.27 N) when compared to the control surfaces (median = 4.52 N) (p < 0.01). Image analysis showed that the control group exhibited greater debris buildup (median = 2.0) compared with the group that received prophylaxis with air-powder polishing (median = 0.5) (p < 0.05).

Conclusion: Cleansing orthodontic brackets with air-powder polishing significantly reduces debris buildup on the bracket surface while decreasing friction levels observed during sliding mechanics.

Introdução:: o acúmulo de detritos na interface braquete-arco pode influenciar no atrito, mas a limpeza dos braquetes usando jatos de bicarbonato de sódio pode interferir nesse processo.

Objetivo:: o objetivo desse estudo foi avaliar a força de atrito e a quantidade de detritos remanescentes em braquetes ortodônticos submetidos à profilaxia com jatos de bicarbonato de sódio.

Material e Métodos:: avaliou-se, ao final do tratamento ortodôntico, a força de atrito e o acúmulo de detritos na superfície de 28 braquetes de pré-molares. Em uma hemiarcada, os braquetes foram jateados com bicarbonato de sódio (n = 14) por 5 segundos, enquanto a hemiarcada contralateral serviu de controle (n = 14). Foram realizados ensaios mecânicos de atrito e análise imagiológica dos braquetes de ambas as hemiarcadas, a jateada e a controle. O teste de Wilcoxon foi utilizado para a análise comparativa entre as hemiarcadas, com p < 0,05.

Resultados:: os braquetes submetidos à limpeza com jatos de bicarbonato de sódio apresentaram menor atrito (mediana = 1,27N), quando comparados aos do lado controle (mediana = 4,52N) (p < 0,01). A análise imagiológica demonstrou que o grupo controle apresentou maior acúmulo de detritos (mediana = 2,0), em comparação ao grupo que recebeu profilaxia com jatos de bicarbonato (mediana = 0,5) (p < 0,05).

Conclusão:: a limpeza dos braquetes ortodônticos por meio do jateamento com bicarbonato de sódio reduz significativamente o acúmulo de detritos na superfície deles, bem como os níveis de atrito observados durante a mecânica de deslizamento.

PubMed Disclaimer

Figures

Figure 1
Figure 1. Intraoral view of prophylaxis by air-powder polishing at an angle of 90° relative to the bracket surface in the maxilla (A) and mandible (B).
Figure 2
Figure 2. Bracket after clinical use not subjected to prophylaxis by air-powder polishing.
Figure 3
Figure 3. Bracket after clinical use subjected to prophylaxis by air-powder polishing.
Figure 4
Figure 4. Mechanical friction test being performed: A) upper and lower plates placed at a 90° angle relative to the ground; B) the plate with the as-received bracket was connected at the upper cross-head and the plate with the bracket being tested was attached to the grip at the base.
See this image and copyright information in PMC

Similar articles

See all similar articles

Cited by

References

    1. Newman MG, Takei H, Carranza FA, Jr, Klokkevold PR. Carranza Periodontia Clínica. 10. São Paulo: Elsevier; 2007.
    1. Pandis N, Papaioannou W, Kontou E, Nakou M, Makou M, Eliades T. Salivary Streptococcus mutans levels in patients with conventional and self-ligating brackets. Eur J Orthod. 2010;32(1):94–99. - PubMed
    1. Lundström F, Hamp SE, Nyman S. Systematic plaque control in children undergoing long-term orthodontic treatment. Eur J Orthod. 1980;2(1):27–39. - PubMed
    1. Yeung SC, Howell S, Fahey P. Oral hygiene program for orthodontic patients. Am J Orthod Dentofacial Orthop. 1989;96(3):208–213. - PubMed
    1. Barnes CM, Russell CM, Gerbo LR, Wells BR, Barnes DW. Effects of an air-powder polishing system on orthodontically bracketed and banded teeth. Am J Orthod Dentofacial Orthop. 1990;97(1):74–81. - PubMed