Skip to main page content
U.S. flag

An official website of the United States government

Dot gov

The .gov means it’s official.
Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

Https

The site is secure.
The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

Access keys NCBI Homepage MyNCBI Homepage Main Content Main Navigation
Randomized Controlled Trial
. 2017 Aug;72(8):1005-1009.
doi: 10.1111/anae.13951. Epub 2017 Jun 12.

A randomised, controlled trial evaluating a low cost, 3D-printed bronchoscopy simulator

Affiliations
Free article
Randomized Controlled Trial

A randomised, controlled trial evaluating a low cost, 3D-printed bronchoscopy simulator

T H Pedersen et al. Anaesthesia. 2017 Aug.
Free article

Abstract

Low-fidelity, simulation-based psychomotor skills training is a valuable first step in the educational approach to mastering complex procedural skills. We developed a cost-effective bronchial tree simulator based on a human thorax computed tomography scan using rapid-prototyping (3D-print) technology. This randomised, single-blind study evaluated how realistic our 3D-printed simulator would mimic human anatomy compared with commercially available bronchial tree simulators (Laerdal® Airway Management Trainer with Bronchial Tree and AirSim Advance Bronchi, Stavanger, Norway). Thirty experienced anaesthetists and respiratory physicians used a fibreoptic bronchoscope to rate each simulator on a visual analogue scale (VAS) (0 mm = completely unrealistic anatomy, 100 mm = indistinguishable from real patient) for: localisation of the right upper lobe bronchial lumen; placement of a bronchial blocker in the left main bronchus; aspiration of fluid from the right lower lobe; and overall realism. The 3D-printed simulator was rated most realistic for the localisation of the right upper lobe bronchial lumen (p = 0.002), but no differences were found in placement of a bronchial blocker or for aspiration of fluid (p = 0.792 and p = 0.057) compared with using the commercially available simulators. Overall, the 3D-printed simulator was rated most realistic (p = 0.021). Given the substantially lower costs for the 3D-printed simulator (£85 (€100/US$110) compared with > ~ £2000 (€2350/US$2590) for the commercially available simulators), our 3D-printed simulator provides an inexpensive alternative for learning bronchoscopy skills, and offers the possibility of practising procedures on patient-specific models before attempting them in clinical practice.

Keywords: Anaesthesia; airway management; bronchoscopy; manikins; three-dimensional printing.

PubMed Disclaimer

Comment in

Publication types

LinkOut - more resources