Acoustic distortion products in humans: systematic changes in amplitudes as a function of f2/f1 ratio

Abstract

The effects of primary-tone separation on the amplitude of distortion-product emissions (DPEs) at the 2f1-f2 frequency were systematically examined in ten ears of five subjects. All individuals had normal hearing and middle-ear function based upon standard clinical measures. Acoustic-distortion products were elicited at 1, 2.5, and 4 kHz by equilevel primaries at 65, 75, and 85 dB SPL, while f2/f1 ratios were varied in 0.02 increments from 1.01-1.41 (4 kHz), 1.01-1.59 (2.5 kHz), or 1.01-1.79 (1 kHz). A principal outcome reflected in the detailed structure of both average and individual ratio functions was a nonmonotonic change in DPE amplitude as the ratio of f2/f1 increased. Despite the presence of amplitude nonmonotonicities, there was clearly a region of f1 and f2 separation that generated a maximum DPE. The effects of primary-tone separation on DPE amplitudes were systematically related to DPE frequency and primary-tone level. For all three levels of stimulation, the f2/f1 ratio was inversely related to DPE frequency. Thus larger ratios reflecting a greater separation of f1 and f2 were more effective in generating DPEs at 1 kHz rather than at 4 kHz. The optimal ratio for 2.5 kHz fell at an intermediate value. Conversely, acoustic distortion-product amplitude as a function of primary-tone level was directly related to the frequency separation of the primary tones. Regardless of the frequency region of the primary tones, smaller f2/f1 ratios were superior in generating DPEs in response to 65-dB stimuli, whereas larger ratios elicited bigger DPEs with primaries at 75 and 85 dB SPL. Within any specific stimulus-parameter combination, individual variability in DPE amplitude was noted. When all stimulus conditions describing the variations in frequency and level were considered, an f2/f1 ratio of 1.22 was most effective in maximizing DPE amplitude.