Skip to main page content
U.S. flag

An official website of the United States government

Dot gov

The .gov means it’s official.
Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

Https

The site is secure.
The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

Access keys NCBI Homepage MyNCBI Homepage Main Content Main Navigation
. 2017 Nov 22:16:418-422.
doi: 10.1016/j.dib.2017.11.064. eCollection 2018 Feb.

Hysteresis data of planar perovskite solar cells fabricated with different solvents

You-Hyun Seo  1 , Eun-Chong Kim  1 , Se-Phin Cho  1 , Seok-Soon Kim  2 , Seok-In Na  1
Affiliations

Hysteresis data of planar perovskite solar cells fabricated with different solvents

You-Hyun Seo et al. Data Brief. .

Abstract

In this data article, we introduced the hysteresis of planar perovskite solar cells (PSCs) fabricated using dimethylformamide (DMF), gamma-butyrolactone (GBL), methyl-2-pyrrolidinone (NMP), dimethylsulfoxide (DMSO), DMF-DMSO, GBL-DMSO and NMP-DMSO as perovskite precursor solutions according to different scan directions, sweep times, and current stability. The hysteresis analyses of the planar PSCs prepared with a glass-ITO /NiOX/perovskite /PC61BM/BCP/Ag configuration were measured with Keithley 2400 source meter unit under 100 mW/cm2 (AM 1.5 G). The data collected in this article compares the hysteresis of PSCs with different solvents and is directly related to our research article "High-Performance Planar Perovskite Solar Cells: Influence of Solvent upon Performance" (You-Hyun Seo et al., 2017 [1]).

PubMed Disclaimer

Figures

Fig. 1
Fig. 1
J-V curves of PSCs with different solvents in different sweep directions.
Fig. 2
Fig. 2
J-V curves of PSCs with different solvents in different scan times.
Fig. 3
Fig. 3
Current stability data of perovskite devices with different solvents measured with different times under the maximum voltage point in the illumination.
See this image and copyright information in PMC

References

    1. Y.-H. Seo, E.-C. Kim, S.-P. Cho, S.-S. Kim, and ​S.-I. Na, High-performance planar perovskite solar cells: Influence of solvent upon performance. Applied Materials Today, 9, 598-604
    1. Xiao Z., Bi C., Shao Y., Dong Q., Wang Q., Yuan Y., Wang C., Gao Y., Huang J. Efficient, high yield perovskite photovoltaic devices grown by interdiffusion of solution-processed precursor stacking layers. Energy Environ. Sci. 2014;7:2619–2623.
    1. Seo Y.-H., Yeo J.-S., Myoung N., Yim S.-Y., Kang M., Kim D.-Y., Na S.-I. Blending of n-type semiconducting polymer and PC61BM for an efficient electron-selective material to boost the performance of the planar perovskite solar cell. ACS Appl. Mater. Interfaces. 2016;8:12822–12829. - PubMed
    1. Liu D., Li Y., Yuan J., Hong Q., Shi G., Yuan D., Wei J., Huang C., Tang J., Fung M.-K. Improved performance of inverted planar perovskite solar cells with F4-TCNQ doped PEDOT:PSS hole transport layers. J. Mater. Chem. A. 2017;5:5701–5708.

LinkOut - more resources