Asbestos fibre burden in gallbladder: A case study

Abstract

The methods conventionally used to determine the burden of asbestos fibres inhaled/incorporated in lung require chemical digestion of the biological matrix before counting/characterising the inorganic fibrous phases under scanning electron microscopy and energy dispersive spectroscopy (SEM/EDS). Asbestos fibres can also be present in extra-pulmonary organs, and we set out to quantify the fibres in gallbladder. Although the standardised procedure requires approximately 5 × 10^-1 g of wet tissue, this amount of tissue is not always available. We applied the procedure on about 9 × 10^-4 g of gallbladder from a patient with known environmental and workplace exposure to asbestos. The patient died of malignant pleural mesothelioma and was also affected by severe bile-tract problems. The traditional procedure of digesting tissue samples in NaClO and filtering the resulting suspension was carried out. The filter was then examined under SEM/EDS using two methods 1. following the standardised procedure to assess the fibre burden in lung by investigating only 2 mm² of the filter (660 microscopic fields), and 2. analysing all the microscopic fields in one-quarter of the filter (about 82 mm²). In parallel, histological sections (prepared in the usual way for medical diagnosis) were analysed without digestion or manipulation of the sample using variable pressure SEM/EDS. The fibre counts obtained using the two methods were of the same order of magnitude, i.e., ∼10⁵ fibres/g of wet tissue. We showed that the counting of fibres in human tissue may be successfully carried out even when a limited amount of tissue is available. We also found that, when exposure to asbestos is considerable, the number of asbestos fibres accumulating in the gallbladder may be significant.

Keywords: Asbestos fibres; Asbestos-related diseases; Fiber quantification; Histological sections; Microscopy.