Skip to main page content
U.S. flag

An official website of the United States government

Dot gov

The .gov means it’s official.
Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

Https

The site is secure.
The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

Access keys NCBI Homepage MyNCBI Homepage Main Content Main Navigation
Review
. 2019 Nov;55(1):41-50.
doi: 10.1016/j.jdsr.2018.10.001. Epub 2018 Nov 23.

Effectiveness of current adhesive systems when bonding to CAD/CAM indirect resin materials: A review of 32 publications

Atsushi Mine  1 , Tomoshige Kabetani  1 , Asuka Kawaguchi-Uemura  1 , Mami Higashi  1 , Yuko Tajiri  1 , Ryosuke Hagino  1 , Dai Imai  1 , Masahiro Yumitate  1 , Shintaro Ban  1 , Mariko Matsumoto  2 , Hirofumi Yatani  1
Affiliations
Review

Effectiveness of current adhesive systems when bonding to CAD/CAM indirect resin materials: A review of 32 publications

Atsushi Mine et al. Jpn Dent Sci Rev. 2019 Nov.

Abstract

The purpose of this review was to assess the available literature regarding bonding between current adhesive systems and computer-aided design/computer-aided manufacturing (CAD/CAM) indirect resin materials, to provide clinicians with a comparative overview of the relevant bonding procedures. An electronic search was performed through PubMed based on the keywords CAD/CAM and dental bonding. Additional relevant literature was obtained from the citations in the articles. A total of 313 papers were identified, of which 281 were excluded as being unsuitable, and an additional 3 papers were identified, giving a total of 32 articles that are included in this review. Based on this survey, it is recommended that microretentive surfaces should be generated by either blasting or hydrofluoric acid etching. This initial process should be followed by silanization to ensure chemical adhesion prior to bonding to CAD/CAM indirect resin composite materials (including Lava Ultimet, KATANA AVENCIA block, Gradia Block, Cerasmart, Paradigm, and Block HC) and CAD/CAM polymer-infiltrated ceramics (such as Vita Enamic). The use of materials containing methyl methacrylate (MMA) also appears to improve the bonding of CAD/CAM poly(methyl methacrylate) (PMMA) resin materials (including XHIPC-CAD/CAM, artBloc Temp, and Telio).

Keywords: Adhesive dentistry; Bonding effectiveness; Computer-aided design; Computer-aided manufacturing; Dental bonding; Esthetic materials.

PubMed Disclaimer

Figures

Fig. 1
Fig. 1
Flow diagram outlining the review identification and screening process adapted.
See this image and copyright information in PMC

References

    1. Witkowski S. (CAD-)/CAM in dental technology. Quintessence Dent Technol. 2005;28:169–184.
    1. Coldea A., Swain M.V., Thiel N. Mechanical properties of polymer-infiltrated-ceramic-network materials. Dent Mater. 2013;29(4):419–426. - PubMed
    1. Ruse N.D., Sadoun M.J. Resin-composite blocks for dental CAD/CAM applications. J Dent Res. 2014;93(12):1232–1234. - PMC - PubMed
    1. Spitznagel F.A., Horvath S.D., Guess P.C., Blatz M.B. Resin bond to indirect composite and new ceramic/polymer materials: a review of the literature. J Esthet Restor Dent. 2014;26(6):382–393. - PubMed
    1. Kawaguchi-Uemura A., Mine A., Matsumoto M., Tajiri Y., Higashi M., Kabetani T. Adhesion procedure for CAD/CAM resin crown bonding: reduction of bond strengths due to artificial saliva contamination. J Prosthodont Res. 2018;62(2):177–183. - PubMed

LinkOut - more resources