Comparison of High-Hydrostatic-Pressure Decellularized Versus Freeze-Thawed Porcine Menisci

Abstract

The meniscus functions as a load distributor and secondary stabilizer in the knee, and the loss of the meniscus increases the risk of osteoarthritis. Freeze-thawed menisci are used in clinical practice to replace defective menisci; however, the disadvantages of freeze-thawed tissues include disease transmission and immune rejection. In this study, we decellularized menisci using high hydrostatic pressure (HHP) and compared the decellularized menisci with freeze-thawed menisci. Porcine menisci were either pressurized at 1,000 MPa for 10 min and then washed with DNase solution or frozen at -80°C for 2 days and thawed. These menisci then underwent in vitro histological, biochemical, and biomechanical comparisons with native menisci. The HHP-treated and freeze-thawed menisci were also subcutaneously implanted in a pig, and later harvested for histological analysis. The numbers of histologically detected cells were significantly lower and the amount of biochemically detected DNA was approximately 100-fold lower in HHP-treated than in native and freeze-thawed menisci. The compression strength of the HHP-decellularized menisci was decreased after 1 and 50 cycles at 20% strain but was unchanged in the freeze-thawed menisci. After implantation, the numbers of multinucleated giant cells were significantly lower around the HHP-treated menisci than around the freeze-thawed menisci. Recellularization of the HHP-decellularized menisci was confirmed. Thus, although the HHP-decellularized menisci were mechanically inferior to the freeze-thawed meniscus in vitro, they were immunologically superior. Our study is the first to demonstrate the use of HHP for decellularization of the meniscus. © 2019 The Authors. Journal of Orthopaedic Research^® published by Wiley Periodicals, Inc. on behalf of Orthopaedic Research Society. J Orthop Res 37:2466-2475, 2019.

Keywords: allograft; extracellular matrix; hydrostatic pressure; meniscus; tissue engineering.