Dual Vibration and Magnetic Energy Harvesting With Bidomain LiNbO3-Based Composite

Abstract

With the recent thriving of low-power electronic microdevices and sensors, the development of components capable of scavenging environmental energy has become imperative. In this article, we studied bidomain congruent LiNbO₃ (LN) single crystals combined with magnetic materials for dual, mechanical, and magnetic energy harvesting applications. A simple magneto-mechano-electric composite cantilever, with a trilayered long-bar bidomain LN/spring-steel/metglas structure and a large tip proof permanent magnet, was fabricated. Its vibration and magnetic energy harvesting capabilities were tested while trying to optimize its resonant characteristics, load impedance, and tip proof mass. The vibration measurements yielded a peak open-circuit voltage of 2.42 kV/g, a short-circuit current of [Formula: see text]/g, and an average power of up to 35.6 mW/g², corresponding to a power density of 6.9 mW/(cm [Formula: see text]), at a low resonance frequency of 29.22 Hz and with an optimal load of 40 [Formula: see text]. The magnetic response revealed a resonant peak open-circuit voltage of 90.9 V/Oe and an average power of up to [Formula: see text]/Oe², corresponding to a relatively large magnetoelectric coefficient of 1.82 kV/(cm · Oe) and a power density of [Formula: see text]/(cm [Formula: see text]). We thus developed a system that is, in principle, able to scavenge electrical power simultaneously from low-level ambient mechanical and magnetic sources to feed low-power electronic devices.