Fabrication of Artificial Compound Eye with Controllable Field of View and Improved Imaging

Abstract

Many arthropods have compound eyes, which are made up of numerous separate visual units (microlenses) or ommatidia. These natural compound eyes have exceptional optical properties such as wide field of view (FOV), low aberration, and fast motion tracking capability. In this paper, a large-scale artificial compound eye (ACE) is fabricated efficiently using a combination of inkjet printing and air-assisted deformation processes. Both size and geometry of the microlens are controlled via superposed drops on the substrate. The simulation results show that the light intensity of the ACE follows a systematic distribution for tilted incident light, which represents a significant improvement, compared to planar distributed microlenses. We then manufacture ACEs with different heights and diameters, and their FOVs are compared with the theoretically predicted results. The measured FOV was 50°-140°. The acceptance angles for the different ACEs are determined, and their relationship with the ratio of height to radius (H/r) of the microlens is investigated in more detail. Furthermore, the imaging properties of the microlenses with different angles of incidences are studied, which suggest a FOV up to 140° and an acceptance angle of about 50°. The microlens captures images even at an angle of incidence of about 60°. The corresponding distortion in both the x and y directions is also investigated. Our findings provide guidelines for the development and fabrication of ACEs with large FOVs and acceptance angles, which may find applications in military, robotics, medical imaging, and astronomy.

Keywords: FOV; acceptance angle; air-assisted deformation; compound eye; inkjet printing; microlens array.