Skip to main page content
U.S. flag

An official website of the United States government

Dot gov

The .gov means it’s official.
Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

Https

The site is secure.
The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

Access keys NCBI Homepage MyNCBI Homepage Main Content Main Navigation
. 2020 Dec;36(6):662-669.
doi: 10.1111/edt.12577. Epub 2020 Jun 23.

Mouthguard use and TMJ injury prevention with different occlusions: A three-dimensional finite element analysis

João Paulo Mendes Tribst  1   2 , Amanda Maria de Oliveira Dal Piva  1   2 , Marco Antonio Bottino  1 , Cornelis Johannes Kleverlaan  2 , Jan Harm Koolstra  3
Affiliations

Mouthguard use and TMJ injury prevention with different occlusions: A three-dimensional finite element analysis

João Paulo Mendes Tribst et al. Dent Traumatol. 2020 Dec.

Abstract

Background/aims: There is a lack of data regarding the mechanical responses of the temporo-mandibular joints during an impact to the orofacial region. The aim of this study was to analyze the biomechanical effects of wearing a mouthguard (MG) on the impact response of the mandibular condyle and articular disk according to the type of occlusion. The hypothesis was that the MG would minimize the effect in those structures, regardless of the occlusion type.

Methods: Using modeling software, a human skull with jaw, teeth and articular disk was created. The models were divided according to the occlusion type (Class I, II, or III) and the presence of a mouthguard (with or without). The geometries were exported to analysis software, and the materials were considered ideal. Fixation occurred at the base of the foramen magnum. The load (0-500N, 1s) was applied to the upper central incisors with a steel ball. Maximum principal stress and Von Mises results (MPa) were obtained in the mandibular condyle and articular disk. Minimum principal stress and maximum shear stresses were also recorded in the articular disk.

Results: For both structures, the MG caused a decrease in stress concentration regardless of the occlusion and stress criteria. The condyle neck was the most tensile-stressed area while for the articular disk, both the superior and inferior surfaces were the most stressed areas. The highest stress peaks in the disk were found for compression followed by tensile and then shear stress.

Conclusion: This biomechanical analysis of the effects of using a mouthguard exhibited considerably decreased stresses on the mandibular condyle and articular disk, regardless of the occlusion type.

Keywords: custom mouthguards; maxillofacial trauma; sports dentistry; temporomandibular joint.

PubMed Disclaimer

References

REFERENCES

    1. Chapman PJ. Mouthguards and the role of sporting team dentists. Aust Dent J. 1989;34:36-43.
    1. Tribst JPM, Dal Piva AMO, Borges ALS, Bottino MA. Simulation of mouthguard use in preventing dental injuries caused by different impacts in sports activities. Sport Sci Health. 2018;15:85-90.
    1. Lloyd JD, Nakamura WS, Maeda Y, Takeda T, Leesungbok R, Lazarchik D, et al. Mouthguards and their use in sports: Report of the 1st International Sports Dentistry Workshop. Dent Traumatol. 2016;33:421-6.
    1. Muhtaroğullari M, Demiralp B, Ertan A. Non-surgical treatment of sports-related temporomandibular joint disorders in basketball players. Dent Traumatol. 2004;20:338-43.
    1. Tribst JPM, de Oliveira Dal Piva AM, Borges ALS, Bottino MA. Influence of custom-made and stock mouthguard thickness on biomechanical response to a simulated impact. Dent Traumatol. 2018;34:429-37.

LinkOut - more resources