Skip to main page content
U.S. flag

An official website of the United States government

Dot gov

The .gov means it’s official.
Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

Https

The site is secure.
The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

Access keys NCBI Homepage MyNCBI Homepage Main Content Main Navigation
. 2020 Jul 17;10(7):1213.
doi: 10.3390/ani10071213.

Influence of the Milking Units on the Pulsation Curve in Dairy Sheep Milking

Maria Caria  1 , Giuseppe Todde  1 , Antonio Pazzona  1
Affiliations

Influence of the Milking Units on the Pulsation Curve in Dairy Sheep Milking

Maria Caria et al. Animals (Basel). .

Abstract

Mechanical milking is a critical operation in ewe dairy farming where the operative parameters and the milking routine strongly influence milk production and animal welfare. The challenge in adapting dairy animals to the farm environmental conditions may cause illness and compromise the quality of the products. From this perspective, it is important to evaluate the technological and operational aspects that can influence milk quality and animal welfare. Thus, the aim of this work was to investigate the effects on the pulsation curve of several teat cup characteristics (volume of the pulsation chamber) at determined operating parameters (vacuum level and pulsator rate) recorded from nine different milking units. Moreover, the touch point pressure of different liners was measured. Data analysis showed that the sheep milking unit characteristics affected the pulsation curve significantly. The length of both the increasing vacuum phase and the decreasing vacuum phase (phase "a" and "c", respectively), which affect the milking and massage phases, was directly related to the pulsation chamber volume (R2 = 0.86) and the pulsator rate. No relationship emerged between the touch point pressure and specific characteristics of the liners such as the material, the shape, the diameter, the length, or the extension of the body. Considering the delicate role that the pulsation plays in ensuring animal welfare during milking, it is important to take into account the complete configuration and operative characteristics of the milking units. This will ensure that the complex interaction between the pulsation system and the milking units is considered when planning and assembling milking systems.

Keywords: dairy sheep; liners; machine milking; pulsation chamber; pulsator rate; working vacuum.

PubMed Disclaimer

Conflict of interest statement

The authors declare no conflict of interest.

Figures

Figure 1
Figure 1
Milking units with different characteristics (G1–G9) adopted in the experimental trials.
Figure 2
Figure 2
Universal material testing stand LF Plus and liner extension tool (A) while testing liner’s touch point pressure (B).
Figure 3
Figure 3
Pulsation chamber volume and length of phases “a” (A) and “c” (B) (p < 0.001).
Figure 4
Figure 4
Correlation between the touch point pressure and the length of phase ”a” (A) and ”c” (B).
See this image and copyright information in PMC

References

    1. Odorčić M., Rasmussen M.D., Paulrud C.O., Bruckmaier R.M. Review: Milking machine settings, teat condition and milking efficiency in dairy cows. Animal. 2019;13:94–99. doi: 10.1017/S1751731119000417. - DOI - PubMed
    1. Zucali M., Tamburini A., Sandrucci A., Gislon G., Bava L. Effect of vacuum level on milk flow and vacuum stability in Alpine goat milking. Small Ruminant Res. 2019;171:1–7. doi: 10.1016/j.smallrumres.2018.11.025. - DOI
    1. Pazzona A., Murgia L. Mungitura ovini: Sistema innovativo Fisiomilk. Macch. Mot. Agric. Edagricole Ed. 1996;9:43–47.
    1. Peris C., Diaz J.R., Torres A., Fernandez N., Rodriguez M. Effect of variable traction on the teat-cup during machine milking of ewes; Proceedings of the 5th International Symposium on Machine Milking of Small Ruminants; Budapest, Hungary. 14–20 May 1993; pp. 385–400.
    1. Akam D.N., Spencer S.B. Design and operation of milking machine components. In: Bramley A.J., Dodd F.H., Mein G., Bramley J.A., editors. Machine Milking and Lactation. Insight Books; Burlington, VT, USA: 1992. pp. 141–196.

LinkOut - more resources