Skip to main page content
U.S. flag

An official website of the United States government

Dot gov

The .gov means it’s official.
Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

Https

The site is secure.
The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

Access keys NCBI Homepage MyNCBI Homepage Main Content Main Navigation
. 2021 May;282(2):175-188.
doi: 10.1111/jmi.12992. Epub 2021 Jan 4.

Self-consistent charging of PMMA thin film induced by a penetrating electron beam in electron microscopy

Wei-Qin Li  1 , Jun Qian  2
Affiliations

Self-consistent charging of PMMA thin film induced by a penetrating electron beam in electron microscopy

Wei-Qin Li et al. J Microsc. 2021 May.

Abstract

The charging of the polymer thin film irradiated by penetrating electron beam (e-beam) is investigated, in parallel with the numerical simulation and experiment. The simulation is performed by combining scattering, drift, diffusion, trapping and recombination. Results show that, due to the electron emission the net charge near the surface is distribution positively, but negatively inside the film because of low electron mobility. The surface potential is positive near surface and accordingly forces some of secondary electrons to return surface. As irradiation proceeds, currents flowing into and out of the film can tend to equilibrium. In the equilibrium state, with increasing beam energy, the surface potential and the efficient emission current decrease, and the electron beam-induced current and the transmission current tend to zero and the beam current valuable, respectively. E-beams of 10-30 keV cause positive charging on PMMA film of 2 µm, which means the high-energy e-beam can effectively discharge a thin film that has been charged negatively by irradiation with low-energy e-beam. With the increase of the film thickness from 1 to 3 µm, the positive surface potential and the emission current decreases and increases, respectively, and the transmission current tends to zero.

Keywords: electron beam-induced current; emission current; surface potential; thin film; transmission current.

PubMed Disclaimer

References

REFERENCES

    1. Ben A. L., Fakhfakh S., Jbara O., & Rondot S. (2017). Effect of nanoclay concentration level on the electrical properties of polypropylene under electron irradiation in a SEM. Journal of Microscopy, 265(3), 322-334.
    1. Li C., Mao S. F., & Ding Z. J. (2019). Time-dependent characteristics of secondary electron emission. Journal of Applied Physics, 125(2), 024902.
    1. Rau E. I., Fakhfakh S., Andrianov M. V., Evstafeva E. N., Jbara O., Rondot S., & Mouze Z. (2008). Second crossover energy of insulating materials using stationary electron beam under normal incidence. Nuclear Instruments & Methods B, 266(5), 719-729.
    1. Wolak M. A., Wan A. S., Shirk J. S., Mackey M., Hiltner A., & Baer E. J. (2012). Imaging the effect of dielectric breakdown in a multilayered polymer film. Journal of Applied Polymer Science, 123(4), 2548-2557.
    1. Hanna R., Paulmier T., & Molinie P. (2014). Radiation induced conductivity in space dielectric materials. Journal of Applied Physics, 115(3), 033713.

LinkOut - more resources