Skip to main page content
U.S. flag

An official website of the United States government

Dot gov

The .gov means it’s official.
Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

Https

The site is secure.
The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

Access keys NCBI Homepage MyNCBI Homepage Main Content Main Navigation
. 2021 Apr;91(4):680-684.
doi: 10.1111/ans.16694. Epub 2021 Mar 18.

Optimal pin position in supraacetabular external fixation

Renate Krassnig  1 , Gloria M Hohenberger  2 , Paul Schimmerl  2 , Angelika Schwarz  3 , Wolfgang Pichler  2 , Paul Puchwein  2 , Renate Wildburger  1
Affiliations

Optimal pin position in supraacetabular external fixation

Renate Krassnig et al. ANZ J Surg. 2021 Apr.

Abstract

Background: This study focuses on (i) the length of the intraosseous part of the supraacetabular pin using the insertion technique from the spina iliaca anterior inferior to the cortical part of the incisura ischiadica major, (ii) the angle of insertion of the supraacetabular pin in the transversal plane and (iii) gender-specific differences of the measured results.

Methods: Images of uninjured pelves from 49 patients (64-line computed tomography scanner) were evaluated, and virtual external fixator pins were positioned using a three-dimensional reconstructions of computed tomography scans. The length of the pins and the insertion angle were investigated. Descriptive statistics were used, and gender-specific differences were calculated. A P-value of <0.05 was considered statistically significant.

Results: The results showed significant differences between male and female pelves concerning both pin length and insertion angel. For male pelves, the mean screw length was 82.7 mm (SD 5.1; range 72.9-94.3). For females, this was statistically significantly shorter (P ≤ 0.001), with an average of 74.1 mm (SD 5.0; range 63.1-81.9). In the male subgroup, the insertion angle was a mean of 22.6° (SD 3.4; range 12.4-31.8), and the female pelves had an average angle of 19.7° (SD 4.0; range 11.7-24.5). These values differed statistically significantly (P = 0.0032).

Conclusion: Based on our measurements, we can confirm that both the length of the Schanz screws and the angle of insertion for the supraacetabular external fixator show a statistically significant difference between males and females.

Keywords: gender difference; pelvic ring fracture; pin position; supraacetabular external fixation.

PubMed Disclaimer

Conflict of interest statement

None declared.

Figures

Fig. 1
Fig. 1
Mimics interface.
Fig. 2
Fig. 2
Determination of screw length (ac1_screw) between the points ‘ac1_ant’ and ‘ac1_post’.
Fig. 3
Fig. 3
Determination of insertion angle.
Fig. 4
Fig. 4
Construction of the screw plane.
See this image and copyright information in PMC

References

    1. Fallinger MS, McGanity PL. Unstable fractures of the pelvic ring. J. Bone Joint Surg. Am. 1992; 74: 781–91. - PubMed
    1. Waikakil S, Kojaranon N, Vanadurrongwan V, Harnroongroj T. An aiming device for pin fixation at the iliac crest for external fixation in unstable pelvic fractures. Injury 1998; 29: 757–62. - PubMed
    1. Giannoudis PV, Pape HC. Damage control orthopedics in unstable pelvic ring injuries. Injury 2004; 24: 581–4. - PubMed
    1. Burgess A, Eastridge B, Young J et al. Pelvic ring disruption: effective classification systems and treatment protocols. J. Trauma 1990; 30: 848–56. - PubMed
    1. Gylling SF, Ward RE, Holcroft JW, Bray TJ, Chapman MW. Immediate external fixation of unstable pelvic fractures. Am. J. Surg. 1985; 150: 721–4. - PubMed

LinkOut - more resources