Skip to main page content
U.S. flag

An official website of the United States government

Dot gov

The .gov means it’s official.
Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

Https

The site is secure.
The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

Access keys NCBI Homepage MyNCBI Homepage Main Content Main Navigation
Case Reports
. 2019 Dec 18;1(5):848-852.
doi: 10.1016/j.jaccas.2019.11.022.

Novel Techniques to Crossing a Severely Stenotic Aortic Valve

Affiliations
Case Reports

Novel Techniques to Crossing a Severely Stenotic Aortic Valve

Ibrahim Yearoo et al. JACC Case Rep. .

Abstract

This report presents 2 cases with the use of different techniques to facilitate aortic valve crossing during transcatheter aortic valve replacement with a balloon-expandable system. Case 1 involves a balloon cushion technique with an Edwards Sapien 3 valve (Edwards Lifesciences), and case 2 describes successful crossing and implantation using a buddy balloon technique with an Edwards Sapien Ultra valve. (Level of Difficulty: Advanced.).

Keywords: AV, aortic valve; LV, left ventricular; TAVR, transcatheter aortic valve replacement; aortic valve; imaging; valve replacement.

PubMed Disclaimer

Figures

None
Graphical abstract
Figure 1
Figure 1
Pre-Procedural MSCT and Angiographic Views of Crossing the Aortic Valve With the Balloon Cushion Technique in Case 1 (A) Heavily calcified trileaflet aortic valve. (B) Mean annular measurement (25 mm). (C) The sinus of Valsalva measurements (biplane 33× 32.8 mm). (D) Failure to cross the aortic valve despite considerable push and manipulation. (E) Inflation of 1 to 2 cm3 of the distal part of the balloon (blue arrow highlighting the outline of contrast). (F) Successful crossing of the aortic valve following the balloon cushion technique. L = left; MSCT = multislice computed tomography; N = node; R = right.
Figure 2
Figure 2
Pre-Procedural MSCT in Case 2 (A) Heavily calcified trileaflet aortic valve. (B) Average annular measurements 24.8 mm. (C) Sinus of Valsalva measurements (biplane 32 × 33.2 mm). (D) Nearly horizontal aorta with an annuloaortic angle of 56°. Avg = average; other abbreviations as in Figure 1.
Figure 3
Figure 3
Angiographic Views Demonstrating Difficulty in Crossing the Aortic Valve and Rescue Maneuvers With the Buddy Balloon Technique (A) Sapien Ultra valve (Edwards Lifesciences) and delivery system were unable to cross the aortic valve. (B) Sapien Ultra valve on the outer curve bias despite delivery system and wire coaxial maneuvers. (C) Failure to cross despite use of a Cristal balloon (Balt extrusion; 20- × 45-mm) for valvuloplasty. (D) Deflating and withdrawing the buddy balloon across the aortic valve (blue arrow) while advancing the Sapien Ultra valve (red arrow) to facilitate successful crossing. (E) Successful crossing and implantation of the Sapien Ultra valve.
Figure 4
Figure 4
Important Differences Between the Edwards Sapien 3 (Commander) and the Edwards Sapien Ultra Delivery System

References

    1. Auffret V., Regueiro A., Campelo-Parada F. Feasibility, safety, and efficacy of transcatheter aortic valve replacement without balloon predilation: a systematic review and meta-analysis. Catheter Cardiovasc Interv. 2017;90:839–850. - PubMed
    1. Van Mieghem N.M., Tzikas A., Nuis R.J., Schultz C., Serruys P.W. How should I treat a staggering TAVI procedure? EuroIntervention. 2010;6:418–423. - PubMed
    1. Sheiban I., Infantino V., Bollati M. Buddy balloon to deliver a percutaneous aortic valve device: a percutaneous shoehorn? Catheter Cardiovasc Interv. 2009;74:805–807. - PubMed

Publication types

LinkOut - more resources