Numerical Analysis for Non-Uniformity of Balloon-Expandable Stent Deployment Driven by Dogboning and Foreshortening
- PMID: 34431035
- DOI: 10.1007/s13239-021-00573-4
Numerical Analysis for Non-Uniformity of Balloon-Expandable Stent Deployment Driven by Dogboning and Foreshortening
Abstract
Purpose: Stenting is the most common intervention for arteriosclerosis treatment; however, the success of the treatment depends on the incidence of in-stent restenosis (ISR). Stent deployment characteristics are major influencers of ISR and can be measured in terms of dogboning, asymmetry, and foreshortening. This study aimed to analyse the implications of balloon and stent-catheter assembly parameters on the stent deployment characteristics.
Methods: Experimental approach to analyse the impact of the balloon and stent-catheter assembly parameters on stent deployment characteristics is a time-consuming and complex task, whereas numerical methods prove to be quick, efficient, and reliable. In this study, eleven finite element models were employed to analyse non-uniform balloon stent expansion pattern, comprised of variation in, stent axial position on balloon, balloon length, balloon folding pattern, and balloon wall thickness.
Results: Obtained results suggest that the axially noncentral position of the stent on balloon and variable balloon thickness lead to non-uniform stent deployment pattern. Also, it was proved that variation in balloon length and balloon folding pattern influence deployment process.
Conclusion: Improved positional accuracies, uniform balloon wall thickness, and selection of the appropriate length of a balloon for selected stent configuration will help to minimize dogboning, asymmetry, and foreshortening during non-uniform stent expansion, thereby reducing the risk of restenosis. The stated numerical approach will be helpful to optimize stent catheter assembly parameters thus minimizing in-vitro tests and product development time.
Keywords: Asymmetry; Balloon; Dogboning; Finite element analysis; Foreshortening; Stent.
© 2021. Biomedical Engineering Society.
References
-
- Azaouzi, M., A. Makradi, and S. Belouettar. Deployment of a self-expanding stent inside an artery: a finite element analysis. Mater. Des. 2012. https://doi.org/10.1016/j.matdes.2012.05.019 . - DOI
-
- Berry, J. L., E. Manoach, C. Mekkaoui, P. H. Rolland, J. E. J. Moore, and A. Rachev. Hemodynamics and wall mechanics of a compliance matching stent: in vitro and in vivo analysis. J. Vasc. Interv. Radiol. 2002. https://doi.org/10.1016/s1051-0443(07)60015-3 . - DOI - PubMed
-
- Bukala, J., P. Kwiatkowski, and J. Malachowski. Numerical analysis of stent expansion process in coronary artery stenosis with the use of non-compliant balloon. Biocybern. Biomed. Eng. 2016. https://doi.org/10.1016/j.bbe.2015.10.009 . - DOI
-
- Bukala, J., P. Kwiatkowski, and J. Malachowski. Numerical analysis of crimping and inflation process of balloon-expandable coronary stent using implicit solution. Int. J. Numer. Method. Biomed. Eng. 2017. https://doi.org/10.1002/cnm.2890 . - DOI - PubMed
-
- De Beule, M., P. Mortier, S. G. Carlier, B. Verhegghe, R. Van Impe, and P. Verdonck. Realistic finite element-based stent design: the impact of balloon folding. J. Biomech. 2008. https://doi.org/10.1016/j.jbiomech.2007.08.014 . - DOI - PubMed
MeSH terms
LinkOut - more resources
Full Text Sources