Application of effective orifice jet length for treating SST effluent of STP by hydrodynamic cavitation

Abstract

Advanced oxidation process in general and hydrodynamic cavitation, in particular, has emerged as a promising technology for the treatment of wastewater in the last few years as the process is energy-efficient and cost-effective. In this process, cavities are generated due to local pressure drops caused by constrictions. This work aimed to investigate the potential of hydrodynamic cavitation as a tertiary treatment to treat the secondary sedimentation tank effluent of a sewage treatment plant, with two laboratory-scale experimental setups having an orifice plate of a 1 mm diameter hole. The process dependency was estimated by optimizing inlet pressure (0.8 bar for setup I and 5 bar for setup II). Moreover, effective orifice jet length was varied to investigate the impact of fluid buoyancy force on expansion and collapse of a cavity on the chemical oxygen demand removal and disinfection potential. At L₂ length (two-thirds of the original length), both setups can degrade the organic and inorganic pollutants to the maximum extent. With the optimum condition in setup II, maximum COD, TSS, and fecal coliform degradation were 80.47%, 62.83%, and 52.27%, respectively, compared to setup I.

Keywords: Chemical oxygen demand; SST effluent; jet length; orifice; tertiary treatment.