Recent Progress in Research of Additive Manufacturing for Polymers

Affiliations

¹ Department of Mechanical Engineering, National University of Singapore, Singapore 117575, Singapore.
² Singapore Centre for 3D Printing, School of Mechanical & Aerospace Engineering, Nanyang Technological University, Singapore 639798, Singapore.

Editorial

Swee Leong Sing et al. Polymers (Basel). 2022.

. 2022 Jun 2;14(11):2267.

doi: 10.3390/polym14112267.

¹ Department of Mechanical Engineering, National University of Singapore, Singapore 117575, Singapore.
² Singapore Centre for 3D Printing, School of Mechanical & Aerospace Engineering, Nanyang Technological University, Singapore 639798, Singapore.

Abstract

Additive manufacturing (AM) methods have grown and evolved rapidly in recent years [...].

The authors declare no conflict of interest.

1. Luis E., Pan H.M., Bastola A.K., Bajpai R., Sing S.L., Song J., Yeong W.Y. 3D Printed Silicone Meniscus Implants: Influence of the 3D Printing Process on Properties of Silicone Implants. Polymers. 2020;12:2136. doi: 10.3390/polym12092136. - DOI - PMC - PubMed
1. Luis E., Pan H.M., Sing S.L., Bajpai R., Song J., Yeong W.Y. 3D Direct Printing of Silicone Meniscus Implant Using a Novel Heat-Cured Extrusion-Based Printer. Polymers. 2020;12:1031. doi: 10.3390/polym12051031. - DOI - PMC - PubMed
1. Khan Z.N., Albalawi H.I., Valle-Pérez A.U., Aldoukhi A., Hammad N., de León E.H.-P., Abdelrahman S., Hauser C.A.E. From 3D printed molds to bioprinted scaffolds: A hybrid material extrusion and vat polymerization bioprinting approach for soft matter constructs. Mater. Sci. Addit. Manuf. 2022;1:7.
1. Wang F., Zheng J., Wang G., Jiang D., Ning F. A novel printing strategy in additive manufacturing of continuous carbon fiber reinforced plastic composites. Manuf. Lett. 2021;27:72–77. doi: 10.1016/j.mfglet.2020.12.006. - DOI
1. Weyhrich C.W., Long T.E. Additive manufacturing of high-performance engineering polymers: Present and future. Polym. Int. 2021;71:532–536. doi: 10.1002/pi.6343. - DOI