Synthesis of porous hydroxysodalite from aluminosilicate rich clay soils: application towards fluoride and pathogen removal
- PMID: 36301389
- DOI: 10.1007/s11356-022-23575-8
Synthesis of porous hydroxysodalite from aluminosilicate rich clay soils: application towards fluoride and pathogen removal
Abstract
This article discussed the potential application of hydrothermally synthesized porous hydroxysodalite material synthesized from aluminosilicate clay material as a multifunctional adsorbent for fluoride and pathogen removal from groundwater. The efficiency of the material towards fluoride removal was evaluated using batch experiments while the efficacy against the E. coli strain was evaluated using well-assay diffusion method. The material showed a maximum fluoride adsorption capacity of 6.01 mg/g at initial concentration range of 5 to 100 mg/L when 1 g/100 mL adsorbent dosage was used at initial pH of 6 ± 0.5 after agitation time of 10 min. The adsorption kinetics data fitted better to pseudo first order of reaction kinetics indicating the dominance of physiosorption adsorption mechanism while the adsorption isotherm data showed better fit to both Langmuir and Freundlich adsorption isotherm model confirming monolayer and multilayer adsorption. The material was successfully regenerated and reused for up to eight successive regeneration-reuse cycles. However, its efficiency was inhibited by the presence of Cl- and CO32-. The material also proven to have antimicrobial activity against E. coli strain. This study concluded that the porous hydroxysodalite material prepared in this study can be used as a multifunctional adsorbent for fluoride and pathogen removal from groundwater.
Keywords: Adsorption; Antimicrobial activity; Hydrothermal treatment; Hydroxysodalite; Multifunctional adsorbent.
© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.
References
-
- Al-Ghouti MA, Daana DA (2020) Guidelines for the use and interpretation of adsorption isotherm models: a review. J Hazard Mater 393:122383 - DOI
-
- Ayinde WB, Gitari WM, Munkombwe M, Samie A, Smith JA (2020) Green synthesis of AgMgOnHaP nanoparticles supported on chitosan matrix: defluoridation and antibacterial effects in groundwater. J Environ Chem Eng 8(5):104026 - DOI
-
- Bhattacharyya KG, Gupta SS (2008) Adsorption of a few heavy metals on natural and modified kaolinite and montmorillonite: a review. Adv Coll Interface Sci 140(2):114–131 - DOI
-
- Demelash H, Beyene A, Abebe Z, Melese A (2019) Fluoride concentration in ground water and prevalence of dental fluorosis in Ethiopian Rift Valley: systematic review and meta-analysis. BMC Public Health 19(1):1–9 - DOI
-
- Dhillon A, Soni SK, Kumar D (2017) Enhanced fluoride removal performance by Ce–Zn binary metal oxide: adsorption characteristics and mechanism. J Fluorine Chem 199:67–76 - DOI
MeSH terms
Substances
LinkOut - more resources
Full Text Sources