Emerging Materials for Additive Manufacturing

Affiliations

¹ Department of Mechanical Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore 117575, Singapore.
² Singapore Centre for 3D Printing, School of Mechanical & Aerospace Engineering, Nanyang Technological University, 50 Nanyang Ave, Singapore 639798, Singapore.

Editorial

Swee Leong Sing et al. Materials (Basel). 2022.

. 2022 Dec 23;16(1):127.

doi: 10.3390/ma16010127.

¹ Department of Mechanical Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore 117575, Singapore.
² Singapore Centre for 3D Printing, School of Mechanical & Aerospace Engineering, Nanyang Technological University, 50 Nanyang Ave, Singapore 639798, Singapore.

Abstract

Additive manufacturing (AM) has grown and evolved rapidly in recent years [...].

The authors declare no conflict of interest.

1. Luis E., Pan H.M., Bastola A.K., Bajpai R., Sing S.L., Song J., Yeong W.Y. 3D Printed Silicone Meniscus Implants: Influence of the 3D Printing Process on Properties of Silicone Implants. Polymers. 2020;12:2136. doi: 10.3390/polym12092136. - DOI - PMC - PubMed
1. Luis E., Pan H.M., Sing S.L., Bajpai R., Song J., Yeong W.Y. 3D Direct Printing of Silicone Meniscus Implant Using a Novel Heat-Cured Extrusion-Based Printer. Polymers. 2020;12:1031. doi: 10.3390/polym12051031. - DOI - PMC - PubMed
1. Gradl P., Tinker D.C., Park A., Mireles O.R., Garcia M., Wilkerson R., Mckinney C. Robust Metal Additive Manufacturing Process Selection and Development for Aerospace Components. J. Mater. Eng. Perform. 2022;31:6013–6044. doi: 10.1007/s11665-022-06850-0. - DOI
1. Omiyale B.O., Olugbade T.O., Abioye T.E., Farayibi P.K. Wire arc additive manufacturing of aluminium alloys for aerospace and automotive applications: A review. Mater. Sci. Technol. 2022;38:391–408. doi: 10.1080/02670836.2022.2045549. - DOI
1. Huo Z., He J., Pu H., Luo J., Li D. Design and printing of embedded conductive patterns in liquid crystal elastomer for programmable electrothermal actuation. Virtual Phys. Prototyp. 2022;17:881–893. doi: 10.1080/17452759.2022.2087096. - DOI