The mechanical behavior of bovine spinal cord white matter under various strain rate conditions: tensile testing and visco-hyperelastic constitutive modeling
- PMID: 36708501
- DOI: 10.1007/s11517-023-02787-1
The mechanical behavior of bovine spinal cord white matter under various strain rate conditions: tensile testing and visco-hyperelastic constitutive modeling
Abstract
The mechanical behavior of the white matter is important for estimating the damage of the spinal cord during accidents. In this study, we conducted uniaxial tension testing in vitro of bovine spinal cord white matter under extremely high strain rate conditions (up to 100 s-1). A visco-hyperelastic constitutive law for modeling the strain rate-dependent behavior of the bovine spinal cord white matter was developed. A set of material constants was obtained using a Levenberg-Marquardt fitting algorithm to match the uniaxial tension experimental data with various strain rates. Our experimental data confirmed that the modulus and tensile strength increased when the strain rate is higher. For the extremely high strain rate condition (100 s-1), we found that both the modulus and failure stress significantly increased compared with the low strain rate case. These new data in terms of mechanical response at high strain rate provide insight into the spine injury mechanism caused by high-speed impact. Moreover, the developed constitutive model will allow researchers to perform more realistic finite element modeling and simulation of spinal cord injury damage under various complicated conditions.
Keywords: Spinal cord; Strain rate; Tensile tests; Visco-hyperelasticity; White matter.
© 2023. International Federation for Medical and Biological Engineering.
References
-
- Zhang JG, Wang F, Zhou R, Xue Q (2011) A three-dimensional finite element model of the cervical spine: an investigation of whiplash injury. Med Biol Eng Comput 49:193–201. https://doi.org/10.1007/s11517-010-0708-9 - DOI - PubMed
-
- Lin HM, Liu CL, Pan YN, Huang CH, Shih SL, Wei SH, Chen CS (2014) Biomechanical analysis and design of a dynamic spinal fixator using topology optimization: a finite element analysis. Med Biol Eng Comput 52:499–508. https://doi.org/10.1007/s11517-014-1154-x - DOI - PubMed
-
- Fradet L, Petit Y, Wagnac E, Aubin CE, Arnoux PJ (2014) Biomechanics of thoracolumbar junction vertebral fractures from various kinematic conditions. Med Biol Eng Comput 52:87–94. https://doi.org/10.1007/s11517-013-1124-8 - DOI - PubMed
-
- Sokolis DP (2010) A passive strain-energy function for elastic and muscular arteries: correlation of material parameters with histological data. Med Biol Eng Comput 48:507–518. https://doi.org/10.1007/s11517-010-0598-x - DOI - PubMed