Relationship between Urinary Parameters and Double-J Stent Encrustation

Abstract

(1) Background: This study aimed to determine the relationship between metabolic urine conditions and the formation, severity, and composition of encrustations in ureteral stents. (2) Methods: Ninety stone-former patients requiring a double-J stent were prospectively enrolled. We collected 24 h metabolic urine samples and demographic data, including indwelling time and previous stone composition. The total deposit weight was obtained, and a macroscopic classification according to the degree of encrustation (null, low, moderate, and high) was created, allowing for intergroup comparisons. Stereoscopic and scanning electron microscopy were performed to identify the type of embedded deposits (calcium oxalate, uric acid, and infectious and non-infectious phosphates). (3) Results: In total, 70% of stents were encrusted; thereof, 42% had a moderate degree of encrustation. The most common encrustation type was calcium oxalate, but infectious phosphates were predominant in the high-encrustation group (p < 0.05). A direct correlation was observed between the purpose-built macroscopic classification and the encrustation weights (p < 0.001). Greater calciuria, uricosuria, indwelling time, and decreased diuresis were observed in stents with a higher degree of encrustation (p < 0.05). The urinary pH values were lower in patients with uric acid encrustations and higher in those with infectious phosphate encrustations (p < 0.05). When compared to non-encrusted stents, patients with calcium-oxalate-encrusted stent showed greater calciuria, phosphaturia, indwelling time, and reduced diuresis; patients with uric-acid-encrusted stent showed greater uricosuria; and patients with infectious and non-infectious phosphate encrustation showed greater urinary pH (p < 0.05). (4) Conclusions: Metabolic urine conditions play a critical role in the formation, composition, and severity of double-J stent encrustation.

Keywords: encrustation; indwelling time; urinary stent.

Figure 1

Macroscopic classification according to encrustation grade: 0, no deposit; 1, low degree of encrustation (<25% of the stent); 2, moderate degree of encrustation (<50% of the stent); 3, high degree of encrustation or deposit block (>50% of the stent).

Figure 2

Composition of previous stones.

Figure 3

Encrustation grade frequencies.

Figure 4

Encrustation type frequencies.

Figure 5

Encrustation type frequencies classified according to the degree of encrustation.

Figure 6

Positive association between our purpose-built macroscopic classification and the weight of the encrustation.