Acoustics of ear canal measurement of eardrum SPL in simulators

Abstract

The effect of standing waves on the ear canal measurement of eardrum sound pressure level (SPL) was determined by both calculation and measurement. Transmission line calculations of the standing wave were made using the dimensions of the ANSI S3.25-1979 ear simulator and three different eardrum impedances. Standing wave curves have been obtained for the standard eardrum impedance at 1-kHz intervals in the range of 1-8 kHz. The changes in standing wave position due to each of the three eardrum impedances and their effects on ear canal measurements of SPL were computed for each of the eardrum impedances. Ear canal SPL measurements conducted on simulators modified to correspond to the eardrum impedances used in the calculations were compared to the computed values. Differences between eardrum SPLs and those measured at different locations in the ear canal approached a standing wave ratio (SWR) of 10-12 dB as the position of the measuring probe approached the standing wave minimum at each frequency. These maximum differences compared favorably with data developed by other investigators from real ears. Differences due to the eardrum impedance were found to be significant only in the frequency region of 2-5 kHz. Calibration of probes in a standard or modified ANSI simulator at the same distance from the eardrum as in the real ear reduces the eardrum SPL measurement errors to those resulting from differences in eardrum impedance.