Skip to main page content
U.S. flag

An official website of the United States government

Dot gov

The .gov means it’s official.
Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

Https

The site is secure.
The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

Access keys NCBI Homepage MyNCBI Homepage Main Content Main Navigation
. 2023 Nov 27:11:1322475.
doi: 10.3389/fchem.2023.1322475. eCollection 2023.

Towards sustainable electrochemistry: green synthesis and sintering aid modulations in the development of BaZr0.87Y0.1M0.03O3-δ (M = Mn, Co, and Fe) IT-SOFC electrolytes

Affiliations

Towards sustainable electrochemistry: green synthesis and sintering aid modulations in the development of BaZr0.87Y0.1M0.03O3-δ (M = Mn, Co, and Fe) IT-SOFC electrolytes

Qurat Ul Ain et al. Front Chem. .

Abstract

In this study, BaZr0.87Y0.1M0.03O3-δ perovskite electrolytes with sintering aids (M = Mn, Co, and Fe) were synthesized by a sustainable approach using spinach powder as a chelating agent and then compared with chemically synthesized BaZr0.87Y0.1M0.03O3-δ (M = Mn, Co, and Fe) electrolytes for intermediate temperature SOFCs. This is the first example of such a sustainable synthesis of perovskite materials with sintering aids. Structural analysis revealed the presence of a cubic perovskite structure in BaZr0.87Y0.1M0.03O3-δ (M = Mn, Co, and Fe) samples synthesized by both green and conventional chemical methods. No significant secondary phases were observed in the samples synthesized by a sustainable approach. The observed phenomena of plane shift were because of the disparities between ionic radii of the dopants, impurities, and host materials. The surface morphology analysis revealed a denser microstructure for the electrolytes synthesized via green routes due to metallic impurities in the organic chelating agent. The absence of significant impurities was also observed by compositional analysis, while functional groups were identified through Fourier-transform infrared spectroscopy. Conductivity measurements showed that BaZr0.87Y0.1M0.03O3-δ (M = Mn, Co, and Fe) electrolytes synthesized by oxalic acid have higher conductivities compared to BaZr0.87Y0.1M0.03O3-δ (M = Mn, Co, and Fe) electrolytes synthesized by the green approach. The button cells employing BaZr0.87Y0.1Co0.03O3-δ electrolytes synthesized by the chemical and green routes achieved peak power densities 344 and 271 mW·cm-2 respectively, suggesting that the novel green route can be applied to synthesize SOFC perovskite materials with minimal environmental impact and without significantly compromising cell performance.

Keywords: SOFC; barium zirconate; electrochemical performance; green synthesis; perovskite; proton conductor.

PubMed Disclaimer

Conflict of interest statement

The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.

Figures

FIGURE 1
FIGURE 1
Schematic representation for the synthesis of BaZr0.87Y0.1M0.03O3−δ (BZYM) electrolyte.
FIGURE 2
FIGURE 2
XRD spectra of BZYM (M = Co, Fe, Mn) electrolytes synthesized by chemical (oxalic acid) and green (spinach) routes (A) and enlarged (110) plane (B).
FIGURE 3
FIGURE 3
Surface morphology of BZYM (M = Co, Fe, Mn) electrolytes synthesized by green (A–C) and chemical routes (D–F).
FIGURE 4
FIGURE 4
EDS qualitative with quantitative inset analysis of BZYM (M = Co, Fe, Mn) electrolytes using green (A–C) and chemical (E–F) route.
FIGURE 5
FIGURE 5
FTIR spectra of BZYM (M = Co, Fe, Mn) electrolytes synthesized by green and chemical route.
FIGURE 6
FIGURE 6
Thermogravimetric curves for BZYM (M = Co, Fe, Mn) electrolytes synthesized by chemical and green route.
FIGURE 7
FIGURE 7
Arrhenius plot of BZYM (M = Co, Fe, Mn) electrolytes synthesized by chemical and green route.
FIGURE 8
FIGURE 8
Electrochemical performance of cells at 650°C with BZYM (M = Co, Fe, Mn) electrolytes synthesized by green and chemical route (A); along with the cross-sectional SEM images of anode supported cell (Ni-BZY | BCYM | BSCF) (B).

References

    1. Aarthi U., Babu K. S. (2020). Grain boundary space charge modulation in BaZr0. 8Y0. 2-xMxO3− δ with transition metal (M= Ni, Co, Fe, and Zn) co-doping. Int. J. Hydrogen Energy 45 (53), 29356–29366. 10.1016/j.ijhydene.2020.07.207 - DOI
    1. Antonova E. P. (2023). Proton-conducting oxides based on LaScO3: structure, properties and electrochemical applications. A focus review. Electrochem. Mater. Technol. 2 (4), 20232021. 10.15826/elmattech.2023.2.021 - DOI
    1. Babar Z. U. D., Hanif M. B., Gao J.-T., Li C.-J., Li C.-X. (2022). Sintering behavior of BaCe0.7Zr0.1Y0.2O3-δ electrolyte at 1150 °C with the utilization of CuO and Bi2O3 as sintering aids and its electrical performance. Int. J. Hydrogen Energy 47, 7403–7414. 10.1016/j.ijhydene.2021.12.075 - DOI
    1. Babar Z. U. D., Hanif M. B., Lin X. L., Gao J., Mosiałek M., Li C. X. (2024). Design of a highly stable and conductive electrolyte by suppressing barium copper oxide formation at the grain interfaces in Cux-doped BaCe0.7Zr0.1Dy0.2-xO3-δ sintered at a low temperature (1200 °C) for SOFCs. J. Colloid Interface Sci. 654, 1124–1135. 10.1016/j.jcis.2023.10.094 - DOI
    1. Balaguer M., Sohn Y. J., Kobertz D., Kasatikov S., Fantin A., Müller M., et al. (2022). Characterization of Y and Mn co-substituted BaZrO3 ceramics: material properties as a function of the substituent concentration. Solid state ionics 382, 115959. 10.1016/j.ssi.2022.115959 - DOI

LinkOut - more resources