Possibility of using the STORAGE rainfall generator model in the flood analyses in urban areas

Abstract

In this investigation, we evaluated the applicability of the Stochastic Rainfall Generator (STORAGE) as a data source for deriving design hydrographs in urban catchments. This assessment involved a comparison with design rainfall calculated using Intensity-Duration-Frequency (IDF) curves derived from observed time-series data. The resulting design rainfall values from both methods were incorporated into a hydrodynamic model of the storm sewer network. To simulate peak discharge and flood areas, the Storm Water Management Model (SWMM) program was employed in conjunction with SCALGO. Our findings indicate that design rainfall values obtained from the STORAGE model exceeded those derived from the observed time-series, with a more pronounced difference for shorter rainfall durations. Simulations further revealed that peak runoff disparities between the two approaches were most evident at a 0.10 probability of exceedance compared to a 0.01 probability. Hydrodynamic simulations demonstrated that the flooding volume induced by design rainfall based on the STORAGE model surpassed that resulting from observed rainfall. Across all events, both the flooding volume and area from STORAGE were consistently greater than those derived from IDF curves. The integration of the SWMM model with the SCALGO application introduced a novel functionality for dynamic visualization of flooding, offering valuable insights for effective flood management in urban areas.

Keywords: Design rainfall; Flood area; Rainfall generator; Urban flooding.