More applicable quantification of non-CO2 greenhouse gas emissions from wastewater treatment plants by on-site plant-integrated measurements

Abstract

Wastewater treatment is an important source of non-CO₂ greenhouse gases (GHGs). However, current quantification of these GHG emissions mainly employs unit-based measurements, where emissions from individual process units are identified, leading to large uncertainties of overall emissions. Here we introduce plant-integrated measurements, where emissions from the whole plant are measured through the off-gas pipelines of the enclosed facility, to quantify methane (CH₄) and nitrous oxide (N₂O) emissions from an underground municipal wastewater treatment plant (WWTP) in southern China. Our results show that the primary oxic tank contributes the largest in total CH₄ and N₂O emissions, with an average fraction of over 80 % and over 90 %, respectively. This can be attributed to the vigorous aeration process, which facilitates the transfer of dissolved CH₄ and N₂O from the liquid phase to the atmosphere through intensive air stripping. The plant-integrated measurements yield around 3-9 times higher emission factors of CH₄ and N₂O than the unit-based measurements. This difference in emission accounting is attributed to both varying survey durations of the two approaches and the omission of uncertain emission sources during unit-based measurements. The comparison between these two approaches indicates that plant-integrated measurements are more applicable for emission quantification of the whole plant whereas unit-based measurements provide insights into the emission characteristics of individual process units. More plant-integrated measurements are needed in the future for more accurate emission accounting of WWTPs.

Keywords: Emission factor; Non-CO(2) greenhouse gases; Plant-integrated measurements; Unit-based measurements; Wastewater treatment.