Efficient cadmium removal from industrial wastewater generated from smelter using chemical precipitation and oxidation assistance
- PMID: 38812097
- DOI: 10.1002/wer.11059
Efficient cadmium removal from industrial wastewater generated from smelter using chemical precipitation and oxidation assistance
Abstract
The effective treatment of cadmium (Cd) in smelting wastewater is of great industrial importance. This study investigates the efficient removal of Cd from real industrial smelting wastewater via chemical precipitation using a series of experiments. In particular, the effects of different precipitants, agitation conditions, and the addition of NaOCl on Cd removal and pH variation are investigated. CaO (3.75 g/L), NaOH (3.50 g/L), and Ca(OH)2 (3.75 g/L) are found to be effective in elevating the wastewater pH and achieving high Cd removal rates (>99.9%), while the use of NaOH as a precipitant maintains a high Cd removal rate even at low agitation intensities. The properties of the produced sludge and supernatant are also determined using moisture content, particle size, and sludge leaching analyses due to the importance of economic and environmental sustainability in filtration, dewatering, and waste disposal processes. In addition, the addition of 2% NaOCl is tested, revealing that it can improve the Cd removal efficiency of Ca(OH)2, thus potentially reducing processing costs and enhancing the environmental benefits. Overall, these findings offer valuable insights into the removal of Cd from smelting wastewater, with potential implications for both environmental sustainability and economic viability. PRACTITIONER POINTS: CaO, NaOH, and Ca(OH)2 effectively remove Cd (>99.9%) from smelting wastewater. The use of NaOH leads to high Cd removal rates even at low agitation speeds. Adding 2% NaOCl can reduce the Ca(OH)2 dose for more economical Cd removal.
Keywords: dosage; industrial wastewater; leaching test; precipitant; smelter.
© 2024 The Author(s). Water Environment Research published by Wiley Periodicals LLC on behalf of Water Environment Federation.
References
REFERENCES
-
- Benalia, M. C., Youcef, L., Bouaziz, M. G., Achour, S., & Menasra, H. (2022). Removal of heavy metals from industrial wastewater by chemical precipitation: Mechanisms and sludge characterization. Arabian Journal for Science and Engineering, 47, 5587–5599. https://doi.org/10.1007/s13369-021-05525-7
-
- Berbar, Y., Hammache, Z. E., Bensaadi, S., Soukeur, R., Amara, M., & Van der Bruggen, B. (2019). Effect of functionalized silica nanoparticles on sulfonated polyethersulfone ion exchange membrane for removal of lead and cadmium ions from aqueous solutions. Journal of Water Process Engineering, 32, 100953. https://doi.org/10.1016/j.jwpe.2019.100953
-
- Bora, A. J., & Dutta, R. K. (2019). Removal of metals (Pb, Cd, Cu, Cr, Ni, and Co) from drinking water by oxidation‐coagulation‐absorption at optimized pH. Journal of Water Process Engineering, 31, 100839. https://doi.org/10.1016/j.jwpe.2019.100839
-
- Brewster, E. T., Freguia, S., Edraki, M., Berry, L., & Ledezma, P. (2020). Staged electrochemical treatment guided by modelling allows for targeted recovery of metals and rare earth elements from acid mine drainage. Journal of Environmental Management, 275, 111266. https://doi.org/10.1016/j.jenvman.2020.111266
-
- Chen, Q., Yao, Y., Li, X., Lu, J., Zhou, J., & Huang, Z. (2018). Comparison of heavy metal removals from aqueous solutions by chemical precipitation and characteristics of precipitates. Journal of Water Process Engineering, 26, 289–300. https://doi.org/10.1016/j.jwpe.2018.11.003
MeSH terms
Substances
Grants and funding
LinkOut - more resources
Full Text Sources