Skip to main page content
U.S. flag

An official website of the United States government

Dot gov

The .gov means it’s official.
Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

Https

The site is secure.
The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

Access keys NCBI Homepage MyNCBI Homepage Main Content Main Navigation
Review
. 2024 Mar 26:4:60.
doi: 10.12688/openreseurope.16792.1. eCollection 2024.

Hard Candy Production and Quality Parameters: A review

Baris Ozel  1 , Sena Kuzu  1 , Mehmet Ali Marangoz  2 , Sarper Dogdu  1   2 , Robert H Morris  3 , Mecit H Oztop  1
Affiliations
Review

Hard Candy Production and Quality Parameters: A review

Baris Ozel et al. Open Res Eur. .

Abstract

Hard candies are sugar confections comprising mainly water and sucrose. Corn syrup, colorants and flavors are also usually added to hard candy formulations. The production of hard candy requires heating of the ingredients to very high temperatures to reduce moisture content and subsequent cooling to obtain a solid matrix. Cooling of the mixtures achieves the final, well known glassy state of the products. In this glassy state, the system is kinetically stable and molecular mobility is restricted, providing longer shelf life to hard candies. There are, however, several factors affecting the final quality and consumer acceptance of hard candies. Production methods and parameters, initial formulations as well as storage conditions all play a crucial role in the physicochemical, textural and sensory properties of hard candies. Addition of colorants and flavors also plays a vital role in the final quality. Although hard candy production is a simple process with few production stages, even small changes in the method of production and process parameters may induce substantial changes in the final product characteristics. Additionally, storage conditions such as temperature and humidity can change the product properties leading to graining and stickiness which are the two major problems for hard candies during storage. Both production and storage conditions should therefore be carefully chosen and controlled for desirable hard candy properties. This review addresses the general production methods and considers process parameters and quality parameters of hard candy products. Moreover, a comprehensive review of the related hard candy literature is also presented. The majority of hard candy reviews focus on specific methods and processes, but this review will present a more general frame on the subject.

Keywords: Hard candy; characterization; crystallization; glucose; storage; sucrose.

PubMed Disclaimer

Conflict of interest statement

No competing interests were disclosed.

Figures

Figure 1.
Figure 1.. Photographic images showing graining in hard candies.
Examples of areas with enhanced crystal growth are labelled in the right hand image of a grained hard candy.
Figure 2.
Figure 2.
DSC curves of the hard candies with high crystallinity ( A), and low crystallinity ( B) fractions.
Figure 3.
Figure 3.. XRD profiles of hard candy samples with different crystallinity properties.
The broad peak is from the amorphous component whilst the sharp peaks originate from crystalline regions.
Figure 4.
Figure 4.. NMR Solid Echo signal presentation of hard candies.
Left hand side is two different crystallinities with the insert showing a close up of the turning point. Right hand side shows hard candy which has been exposed in the short term to different levels of humidity. An additional long relaxation is seen as water is absorbed resulting in stickiness but minimal loss of crystallization has occurred.
Figure 5.
Figure 5.. NIR spectra obtained from hard candy samples with different crystallinities.
See this image and copyright information in PMC

References

    1. Avaltroni F, Bouquerand PE, Normand V: Maltodextrin molecular weight distribution influence on the glass transition temperature and viscosity in aqueous solutions. Carbohydr Polym. 2004;58(3):323–334. 10.1016/j.carbpol.2004.08.001 - DOI
    1. Balasubramanian S, Devi A, Singh KK, et al. : Application of glass transition in food processing. Crit Rev Food Sci Nutr. 2016;56(6):919–936. 10.1080/10408398.2012.734343 - DOI - PubMed
    1. Banwell CN, McCash EM: Fundamentals of molecular spectroscopy. (4th ed.). McGraw-Hill, London,1994.
    1. Boland AB, Delahunty CM, Van Ruth SM: Influence of the texture of gelatin gels and pectin gels on strawberry flavour release and perception. Food Chem. 2006;96(3):452–460. 10.1016/j.foodchem.2005.02.027 - DOI
    1. Boonyai P, Howes T, Bhandari B: Instrumentation and testing of a thermal mechanical compression test for glass-rubber transition analysis of food powders. J Food Eng. 2007;78(4):1333–1342. 10.1016/j.jfoodeng.2006.01.005 - DOI

LinkOut - more resources